Hozelock Sensor Controller 2212 Bruksanvisning

Hozelock Bevattningskontroll Sensor Controller 2212

Läs gratis den bruksanvisning för Hozelock Sensor Controller 2212 (45 sidor) i kategorin Bevattningskontroll. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6.5 recensioner. Har du en fråga om Hozelock Sensor Controller 2212 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/45

2212

Sensor Controller

www.hozelock.com

Hozelock Ltd.

Midpoint Park, Birmingham,

B76 1AB. England

Tel: +44 (0) 121 313 1122

www.hozelock.com

33914-000

Year

guarantee

Sensor Controller

3 4

A 21mm G½ (½”) Adaptor

B 26.5mm G¾ (¾”) Adaptor

C 33.3mm G1 (1”) Adaptor

D Duration dial

E LED indicator lights

F Water Now button - On/Off/Override

G Hose pipe connector

H Light Sensor

Installation & operating instructions

READ THESE INSTRUCTIONS CAREFU LLY BEFORE

ATTEMPTING TO USE THIS PRODUCT.

FAILURE TO OBSERVE THE FOLLOWING NOTICES MAY RESULT

IN INJURY OR PRODUCT DAMAGE

General information

THESE INSTRUCT IONS ARE ALSO AVAILABLE ON THE

HOZELOCK WEBSITE.

This product meets the requirem ents of IP44 and therefore can

be used in exposed weather cond itions.

This product is not suitable for supplying drinking water.

Threaded water connections are suitable for hand tightening

only.

This product can be fitted to mains water suppl y.

This product can be fitted to outdoor water butts or tanks that

have an inline filter fitted before the controller.

Installing the batteries

You must use Alkaline batt eries – altern atives will result in

incorrect operation.

1 Remove the fro nt panel as shown (Fig. 1), gripping the recessed

part and pulling towards you.

2 Insert 2 x 1.5v AA (LR6) batteries (Fig . 1) and replace the

controller front panel.

IMPORTANT: Rechargeab le bat ter ies must n ot be used.

3 Replace batteries each season. (max 8 m onths use, used twice a

day)

4 When batteries are installed t he motor will operate the internal

valve to check t hat it is ready for u se and the batteries install ed

have enough charg e to safely operate the valve

5 If the LED indicator flashes red, the batteries need to be

replaced.

Connecting the Sensor Controller to the tap

1 Choose the co rrect tap adapter (Fig . 3)

2 Using the correc t adapter(s), attach the controller to the tap and

tighten firm ly to avoid leaks. Do not use a spanner or other tool

to tighten as this might damage the threads. (Fig. 4)

3 Turn on the Tap.

How to set up the Sensor Controller - automatic

watering

Produktspecifikationer

Varumärke:	Hozelock
Kategori:	Bevattningskontroll
Modell:	Sensor Controller 2212
Vikt:	680 g
LED-indikatorer:	Ja
Stemcodecs:	G.711, G.722, G.726, G.729A
står fast vid:	Ja
Nummer id:	Ja
Konferenssamtal möjligt:	Ja
Förvaringstemperatur:	-20 - 65 °C
Återställningsknapp:	Ja
Mått (B x D x H):	290 x 180 x 33 mm
VoIP-protokoll:	SIP, IAX2
Modem (RJ-11) port:	8
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	10 - 90 procent
Kompatibel med fax:	T.38