Humminbird 300TX Bruksanvisning

Humminbird Inte kategoriserad 300TX

Läs gratis den bruksanvisning för Humminbird 300TX (28 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 1.5 recensioner. Har du en fråga om Humminbird 300TX eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/28

INSTALLATION PREPARATION

PARTS SUPPLIED

Before installing your new Humminbird fishfinder, please ensure the following parts are

included in the box:

• Fishfinder

• Transducer with 20’ (6m) of cable and mounting hardware kit

• Mounting system and mounting hardware kit

• 6’ (2m) power cable

• Publications kit

It any of these items is missing, call our Customer Support Hotline.

ACCESSORIES

Humminbird offers a wide assortment of accessories that complement and expand the

capability of your new fishfinder. These accessories are designed with the same high

standards and are backed by the same one-year warranty. The Humminbird Accessory

catalog included with your unit contains descriptions of the many accessories available

and ordering information. All Humminbird accessories are available through your full-

service Humminbird dealer or factory direct through our number listed in the Customer

Support section.

INSTALLATION OVERVIEW

Your Humminbird fishfinder consists of two primary components to install: the control

head and the transducer.

The control head contains the sonar transmit and receive circuitry, as well as the user

controls and display. It should be installed in a location that provides access to the

controls and visibility while in use. The control head mounts on a quick disconnect

mounting system that swivels and tilts providing flexibility for viewing from almost

anywhere on the boat.

The transducer converts electrical energy from the transmitter into mechanical pulses or

sound waves. The transducer also receives the reflected sound waves and converts

them back into electrical signals for display on the control head. It should be installed in

contact with the surface of the water in an area that has smooth waterflow- usually on

the transom of the boat. There are several mounting options for the transducer. Review

the following section to determine the method that works for you and your boat.

INSTALLATION PREPARATION

INSTALLATION OVERVIEW

Determining How to Mount the Transducer

Your Humminbird fishfinder includes a standard

transducer. This transducer can be mounted on the

transom of the boat or bonded to the inside of a fiberglass

hull boat.

The transom installation, which is the most widely used,

places the transducer on the outside of the boat hull. This

technique produces the least signal loss, and provides a

way to adjust the transducer after installation. The

mounting hardware included is designed to protect both

the boat and the transducer should the boat strike debris in

the water or when trailering.

As an alternative to transom mounting, it is possible on many

fiberglass-hulled boats to glue the transducer on the inside of

the boat hull. Since fiberglass has similar sonar

characteristics as water, the sonar signal can pass through

the boat hull with minimal loss. The hull of the boat must be

single layer construction (not double-hulled) Also, any air

trapped in the lamination of the fiberglass would prevent the

sonar signal from passing through.

Inside the hull installations require no holes be drilled into the

boat and through experimentation, high-speed operation

comparable to transom mounting can be achieved. Two-part slow cure epoxy (not

included) is required to glue the transducer in place.

Produktspecifikationer

Varumärke:	Humminbird
Kategori:	Inte kategoriserad
Modell:	300TX
Färg på produkten:	Wit
Vikt:	1600 g
Bredd:	220 mm
Djup:	220.5 mm
Höjd:	55.2 mm
LED-indikatorer:	Ja
På / Av knapp:	Ja
Placering:	Ceiling, Wall
Frekvensband:	2.412 - 2.472, 5.18 - 5.32, 5.5 -5.6, 5.64 - 5.7 GHz
Antal Ethernet LAN (RJ-45)-portar:	2
Certifiering:	UL 60950-1\nCAN/CSA-C22.2 No. 60950-1\nUL 2043\nIEC 60950-1\nEN 60950-1\nEN 50155
Internminne:	1024 MB
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Nätverksstandard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3at, IEEE 802.3u
Säkerhetsalgoritmer som stöds:	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-SIM, EAP-TLS, EAP-TTLS, MSCHAPv2, WPA, WPA2
Antennförstärkningsnivå (max):	5 dBi
Förvaringstemperatur:	-30 - 70 °C
Flashminne:	256 MB
Höjd, drift:	0 - 3000 m
Höjd vid förvaring:	0 - 4570 m
Maximal dataöverföringshastighet:	5200 Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
Kanal bandbredd:	20 MHz
Wifi Multimedia (WMM)/(WME):	Ja
Power over Ethernet (PoE):	Ja
Antennfunktioner:	Ingebouwde antenne
Antal kanaler:	29 kanalen
Sändningseffekt:	23 dBmW
Strömförbrukning (typiskt):	30 W
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	10 - 90 procent
Harmoniserad systemkod (HS):	85176990
Antennriktningstyp:	Omni-directioneel
Användartjänst för fjärrautentisering (RADIUS):	Ja