I-PRO WV-QJB502A Bruksanvisning

I-PRO ej kategoriserat WV-QJB502A

Läs gratis den bruksanvisning för I-PRO WV-QJB502A (24 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 2 recensioner. Har du en fråga om I-PRO WV-QJB502A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/24
1
av0923-2113
PGQP3711XA
Before attempting to connect or install this product, please read these instructions carefully
and save this manual for future use.
The external appearance and other parts shown in this manual may differ from the actual
product within the scope that will not interfere with normal use due to improvement of the
product.
i-PRO Co., Ltd. assumes no responsibility for injuries or property damage
resulting from failures arising out of improper installation or operation
inconsistent with this documentation.
Base Bracket
Model No. WV-QJB502A
Installation Guide
© i-PRO Co., Ltd. 2023
https://www.i-pro.com/
Included Installation Instructions
"<Control No.: C****>" used in these documents should be used to search for
information on our technical information website (https://i-pro.com/products_and_
solutions/en/surveillance/learning-and-support/knowledge-base/technical-information)
and will guide you to the right information.
2
Caution:
Before attempting to connect or operate
this product, please read these instruc-
tions carefully.
Notice:
This product is not suitable for use in loca-
tions where children are likely to be pres-
ent.
Do not install this product in locations
where ordinary persons can easily reach.
For information about screws and other
parts required for installation, refer to the
corresponding section of this document.
Do not hang down from this product or use this product as a pedestal.
Failure to observe this may cause injury or accidents.
Do not use this bracket except with suitable cameras.
Failure to observe this may cause a drop resulting in injury or accidents.
Refer installation work to the dealer.
Installation work requires technique and experience.
Failure to observe this may cause fire, electric shock, injury, or damage to the product.
Be sure to consult the dealer.
The screws and bolts must be tightened to the specied torque.
Failure to observe this may cause a drop resulting in injury or accidents.
Install the product accurately and securely on the installation surface in
accordance with the installation instructions.
Failure to observe this may cause injury or accidents.
Do not rub the edges of metal parts with your hand.
Failure to observe this may cause injury.
When using this product, also read the “Precautions” described in the operating
instructions for the camera to be attached.
Precautions


Produktspecifikationer

Varumärke: I-PRO
Kategori: ej kategoriserat
Modell: WV-QJB502A

Behöver du hjälp?

Om du behöver hjälp med I-PRO WV-QJB502A ställ en fråga nedan och andra användare kommer att svara dig