IFM AC2631 Bruksanvisning


Läs gratis den bruksanvisning för IFM AC2631 (3 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 2.5 recensioner. Har du en fråga om IFM AC2631 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
Installation instructions
Field modules DP
AC2625/ AC2630 / AC2631 / AC2634
AC2636 / AC2637 / AC2638
7390988/00 03/2013
UK
2
1 Functions and features
Non-observance of the instructions, operation which is not in accordance with use
as prescribed below, wrong installation or incorrect handling can affect the safety
of operators and machinery.
2 Symbols used
Instruction
Important note
Non-compliance can result in malfunction or interference.
3 Installation
Disconnect the system from power before installation.
For installation choose a flat mounting surface.
The entire bottom of the module must lie flat on the mounting surface.
Fix the module onto the mounting surface using 2 M3 screws and washers.
4 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical equipment
must be adhered to.
Disconnect the installation from power and connect the unit.
Recommended tightening torques:
M12 Profibus connection: 0.6 Nm.
M12 sockets: 0.6 Nm
M8 connections: 0.4 Nm
4.1 Pin connection
Pin connection of the modules see device label
3
UK
5 Operating and display elements
2
U
B
/U
L
Out
U
B
/U
L
In
1
Profibus In
Profibus Out
M3
M3
Status LEDs
module
Status LEDs
port
LEDs
Profibus
LEDs U
B
/U
L
1: DIP switch for setting of the Pro bus address
2: Sensor inputs / outputs
6 Technical data
Detailed manuals, technical data and further information at www.ifm.com.


Produktspecifikationer

Varumärke: IFM
Kategori: ej kategoriserat
Modell: AC2631

Behöver du hjälp?

Om du behöver hjälp med IFM AC2631 ställ en fråga nedan och andra användare kommer att svara dig