IFM JN2300 Bruksanvisning

IFM Inte kategoriserad JN2300

Läs gratis den bruksanvisning för IFM JN2300 (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 1.5 recensioner. Har du en fråga om IFM JN2300 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

Installation instructions

Inclination sensor JN

JN2300

JN2301

80254489/00 05/2016

1 Functions and features

The 2-axis inclination sensor with SAE J1939 interface enables angle levelling and

position detection of mobile machines.

Typical applications are, for example, the position detection of access platforms,

levelling of mobile cranes or set-up of mobile machines.

2-axis inclination sensors with a measuring range of:

• JN2300: ±180° / 0...360°

• JN2301: ±45°

2 Symbols used

►Instructions

Important note

Non-compliance can result in malfunction or interference.

3 Installation

►Disconnect the system from power before installation.

3.1 Fastening

►Fasten the device using 4 M5 screws on a flat surface.

Screw material: steel or stainless steel.

3.2 Mounting surface

The housing must not be exposed to any torsional forces or mechanical stress.

►Use compensating elements if there is no flat mounting surface available.

4 Electrical connection

The unit must be connected by a qualified electrician.

The national and international regulations for the installation of electrical equipment

must be adhered to.

►Disconnect the installation from power and connect the unit.

The inclination sensors are fitted with two round 5-pole M12 connectors (A-coded).

2 1

1: CAN_SHLD shield

2: CAN_V+ supply voltage 24 V DC

3: CAN_GND GND

4: CAN_H H bus cable

5: CAN_L L bus cable

M12 connector CAN-In

1 2

1: CAN_SHLD shield

2: CAN_V+ supply voltage 24 V DC

3: CAN_GND GND

4: CAN_H H bus cable

5: CAN_L L bus cable

M12 socket CAN-Out

5 Technical data

Detailed manuals, technical data and further information at www.ifm.com.

6 Maintenance, repair and disposal

The unit is maintenance-free.

►Dispose of the device in accordance with the national environmental

regulations.

7 Approvals/standards

The CE declarations of conformity and approvals can be found at www.ifm.com.

Produktspecifikationer

Varumärke:	IFM
Kategori:	Inte kategoriserad
Modell:	JN2300
Färg på produkten:	Red, White
Sladdlängd:	3 m
Snäll:	Droog- & stoomstrijkijzer
Tillgångar:	2600 W
Vattentankens kapacitet:	0.3 l
Automatisk avstängning:	Ja
Självrengörande:	Ja
Mjukt grepp:	Ja
Antidroppfunktion:	Ja
Sprayfunktion:	Ja
Kontinuerlig ånga version:	40 g/min
Vertikal ångfunktion:	Ja
Variabel ånga:	Ja
Yttersulans material/beläggning:	Keramische zoolplaat
Steam boost prestanda:	130 g/min
Steam boost funktion:	Ja
Trådlös:	Nee
Anti-kalk:	Ja