Infinity Reference RS 4 Bruksanvisning
Läs gratis den bruksanvisning för Infinity Reference RS 4 (8 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2 recensioner. Har du en fråga om Infinity Reference RS 4 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
Owner’s Manual
Part #333374-001
®
Reference Standard (RS)
Floorstanding Speaker System
Models RS-4, RS-5
RS
2
◆
Reference Standard (RS-4, RS-5) – Owner’s Manual
T R SHE EFERENCE TANDARD ERIES(RS) S
All RS Series products use efficient drivers for maximum stereo output with minimal amplifier
power. They are magnetically shielded, making them suitable for home theater applications
as well.
UNPACKING HE PEAKERST S
If you suspect damage from transit, report it immediately to your dealer and/or delivery service.
Keep the shipping carton and packing materials for future use.
These speakers are covered by a Limited Warranty, so save the sales receipt to protect your
purchase and aid in any service-related questions. Also, save these instructions for future
reference.
Reference Standard (RS-4, RS-5) – Owner’s Manual
◆
3
Figure 1. This cross section shows how to
install a foot onto the bottom of an RS-4
or RS-5 floorstanding speaker.
INSTALLING EETF
Refer to Figure 1 as you perform the following steps:
1. Open each accessory pack and locate the following items: four feet (with spike/round ends),
four locking nuts, four nylon domes, and one wrench.
2. Lay each speaker on its side and locate the four threaded holes on the bottom.
3. For carpets, screw the round end of a foot into each hole and hand tighten a nut onto each
one. Leave a minimum of
5
⁄8"
exposed spike. (On thicker carpets, you can increase the
length of exposed spike up to
1
1
⁄8"
.) For hard-surface floors, screw the spike end into each
hole instead and leave
5
⁄8"
of round end exposed.
4. Carefully flip each speaker upright to sit on its feet.
5. If needed, adjust the feet so each speaker is level and then tighten each nut with the
enclosed wrench. To protect hard surfaces (e.g., wood floors), slip a nylon dome onto each
round end.
Nylon Dome
(optional for
wood floors)
Locking Nut
HARD-SURFACE
FLOORS
CARPETED
FLOORS
Foot
round end
spike end
Bottom
Of Speaker
5
⁄8"
5
⁄8" min.
1
1
⁄8" max.
Produktspecifikationer
| Varumärke: | Infinity |
| Kategori: | högtalare |
| Modell: | Reference RS 4 |
Behöver du hjälp?
Om du behöver hjälp med Infinity Reference RS 4 ställ en fråga nedan och andra användare kommer att svara dig
högtalare Infinity Manualer
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
högtalare Manualer
- Krüger And Matz
- Martin Audio
- DB Technologies
- Sonance
- Grimm Audio
- Canon
- Vizio
- Edwards Signaling
- AV:link
- Artsound
- Dynaudio
- MuxLab
- Dali
- Cerwin-Vega
- Reflexion
Nyaste högtalare Manualer
21 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025