InFocus IN2124X Bruksanvisning

InFocus Beamer IN2124X

Läs gratis den bruksanvisning för InFocus IN2124X (11 sidor) i kategorin Beamer. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 8.5 recensioner. Har du en fråga om InFocus IN2124X eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/11

Function Command Returns

Volume (VOL?) (0-10, 8)

Source (SRC?) (0-22, 2)

Lamp hours (LMP?) (0-9999, 42)

Max lamp life (LIF?) ("5000")

Function Command Returns

Volume (VOL+) Increases volume by one increment

Source (SRC0) Switches to Computer1

Power (PWR1) Turns the projector on

Ceiling mode (CEL1) Turns on ceiling mode

InFocus IN124x, IN126x, IN128HDx, IN124STx, IN126STx, IN128HDSTx,

IN2124x, IN2126x, IN2128HDx

RS232 Control Instructions

Serial Communication Configuration

To control this projector via RS-232, connect a null modem cable and set the control system serial port

settings to match the following communication configuration.

When Power Saving mode is enabled and the projector is turned off, the projector will echo commands. It will

not echo commands when the projector is on or when Power Saving mode is disabled.

RS-232 Command and Configuration

Baud Rate:9600 Parity Bit:none Data Bit:8 Stop Bit:1

Lamp Ignition delay = 10s

Power Down delay = 10s

Source change delay = 3s

Intercommand delay minumum = 5ms

Intercharacter delay minumum = 2ms

Command Format

All commands consist of 3 alpha characters followed by a request, all enclosed in parentheses. The request can

be a read request (indicated by a "?") or a write request (indicated by 1 to 4 ASCII digits).

Error Conditions

Not all commands consist of 3 alpha characters followed by a request, all enclosed in parentheses. The request

can be a read request (indicated by a "?") or a write request (indicated by 1 to 4 ASCII digits).

Read Requests

A read command returns a text string or the rang and the current setting, for example:

Write Requests

Some commands have ranges, while others are absolute. If a number greater or less than the maximum range

is received, it will return an error "?".

Function Command Returns

Keystone (DKH20!) Sets keystone to +20

Source (SRC4!) Switches to HDMI1

Power (PWR0!) Turns the projector off

Color space Sets the color space to REC601(CSM3!)

Command List

Power return code (ok)

Status ? (PWR?) (0-1,n) n=0,1

ON (PWR1)

OFF (PWR0)

ON & return (PWR1!) (0-1,1)

OFF & return (PWR0!) (0-1,0)

Menu(OSD) Status return code (ok)

Status ? (MNU?) (0-1,n) n=0,1

ON (MNU1)

OFF (MNU0)

ON & return (MNU1!) (0-1,1)

OFF & return (MNU0!) (0-1,0)

Key Pad return code (ok)

Status ? (NAV?) (0-5,0) n=0-5

Menu (NAV0)

Up (NAV1)

Down (NAV2)

Select (NAV3)

Left (NAV4)

Right (NAV5)

Menu & return (NAV0!) (0-5,0)

Up & return (NAV1!) (0-5,1)

Down & return (NAV2!) (0-5,2)

Select & return (NAV3!) (0-5,3)

Left & return (NAV4!) (0-5,4)

Right & return (NAV5!) (0-5,5)

Auto Source return code (ok)

Status ? (ASC?) (0-1,n) n=0,1

ON (ASC1)

OFF (ASC0)

ON & return (ASC1!) (0-1,1)

OFF & return (ASC0!) (0-1,0)

Write/Read Requests

Most commands have a "& Return" option you can use by adding a "!" before the final parenthesis. This will

add a read command after the write command has been processed. For example, (PWR1!) would be equivalent

to entering (PWR1)(PWR?).

Blank Key return code (ok)

Status ? (BLK?) (0-1,n) n=0,1

ON (BLK1)

OFF (BLK0)

ON & return (BLK1!) (0-1,1)

OFF & return (BLK0!) (0-1,0)

Blank Screen return code (ok)

Status ? (BSS?) (0-6,n) n=0,3,4,5

Blue Screen (BSS0)

Black Screen (BSS3)

White Screen (BSS4)

Factory LOGO (BSS5)

User LOGO (BSS6)

Blue Screen & return (BSS0!) (0-6,0)

Black Screen & return (BSS3!) (0-6,3)

White Screen & return (BSS4!) (0-6,4)

Factory LOGO & return (BSS5!) (0-6,5)

User LOGO & return (BSS6!) (0-6,6)

Source return code (ok)

Status ? (SRC?) (0-22,n) n=0-22

Next Source (SRC+)

Previous Source (SRC-)

Computer1 (SRC0)

Computer2 (SRC1)

VIDEO (SRC11)

S-VIDEO (SRC12)

HDMI1 (SRC4)

LightCast (selected models) (SRC15)

Next Source & return (SRC+!) (0-22,n) n=0-22

Previous Source & return (0-22,n) n=0-22(SRC-!)

Computer1 & return (SRC0!) (0-22,0)

Computer2 & return (SRC1!) (0-22,1)

VIDEO & return (SRC11!) (0-22,11)

S-VIDEO & return (SRC12!) (0-22,12)

HDMI & return (SRC4!) (0-22,4)

LightCast & return (selected models) (SRC15!) (0-22,15)

Auto Image return code (ok)

exec (AIM1)

Keystone return code (ok)

Status ? (DKH?) (-40-40,nnn) n=-40 ~ 40

Keystone + (DKH+)

Keystone - (DKH-)

Set keystone (DKHnnn) n=-40 ~ 40

Keystone + & return (-40-40,nnn) n=-40 ~ 40(DKH+!)

Keystone - & return (-40-40,nnn) n=-40 ~ 40(DKH-!)

Set keystone & return (DKHnnn!) n=-40 ~ 40 (-40-40,nnn) n=-40 ~ 40

Produktspecifikationer

Varumärke:	InFocus
Kategori:	Beamer
Modell:	IN2124X
Vikt:	260 g
Maximal upplösning:	640 x 480 Pixels
Typ av strömkälla:	Power over Ethernet (PoE)
Minimal belysning:	1 Lux
Video rörelsedetektering:	Ja
Antal Ethernet LAN (RJ-45)-portar:	1
Brännvidd:	0 - 3 mm
Certifiering:	EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 55024, \nFCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, \nC-tick AS/NZS CISPR 22, MIC Class B, EN 60950-1
Optisk sensorstorlek:	1/4 "
Bildsensortyp:	CMOS
Internminne:	64 MB
Max 30 bilder per sekund:	30 fps
IP-adressfilter:	Ja
Flashminne:	32 MB
Power over Ethernet (PoE):	Ja
Drifttemperatur (TT):	0 - 50 °C
Relativ luftfuktighet i drift (VV):	20 - 80 procent
Linsens betraktningsvinkel, horisontell:	66 °