Intellytech LiteCloth Mega-6 Bruksanvisning
Intellytech
Lättnad
LiteCloth Mega-6
Läs gratis den bruksanvisning för Intellytech LiteCloth Mega-6 (10 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 3.9 stjärnor baserat på 9.5 recensioner. Har du en fråga om Intellytech LiteCloth Mega-6 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/10
,0_MEGA-6FC_MEGA-8FC_eng
11
E) Attention
1. Please read this manual before using this product and follow the instructions
2. Should be used with the appropriate voltage labeled on product. Make sure the power button is set to off
before pressing the power button. Please remove the power connection if the light is not in-use. Don’t pull the
power cable directly. Please grip the power plug and pull it out from the socket.
3. Make sure your hand is dry when inserting and unplugging the power plug. Don’t touch the metal part
directly.
4. Keep the environment dry and ventilated when using the product. Do not leave or use the product in a
humid or dusty environment. And keep it away from fire or extreme heat.
5. Clean this product only with a soft and dry cloth.
6. Do NOT apply extreme pressure and do not drop the product.
7. Improper installation may damage the light, and there can be high voltage inside the unit. Please Do NOT
open or repair the unit yourself. If there is any defect, please contact Intellytech directly.
8. Only use the specific Li-ion camcorder batteries according to the model of the battery holder on the rear
panel. Do not install 24V batteries.
9. Please do not look at the LEDs directly or touch them. Please turn off the light if it is unattended.
10. Please make sure the product cools down and put it back in the case after being used. Don’t store the
product in a humid environment, and avoid direct sunshine. Avoid freezing temperatures.
D) Temperature Notice:
Instruction Manual
LiteCloth 3.0
MEGA-8 / 6
Storing your Mega-LC in a cold or location?
For optimal power distribution, allow your Mega-LC 3.0 to warm up for
5 minutes using the following settings:
1: Set the bi-color LED’s to 5600k
2: Set the output to 10%
*This isn’t required but will help in evenly distributing power through
the LED’s. We recommend this if the light is being stored in a cold grip
truck or if it has recently shipped.
Need Help? Contact us now using Live Chat at www.intellytechusa.com.
We usually respond within 10 seconds during business hours and can help with
any questions.
Email: customerservice@intellytechusa.com
Produktspecifikationer
| Varumärke: | Intellytech |
| Kategori: | Lättnad |
| Modell: | LiteCloth Mega-6 |
Behöver du hjälp?
Om du behöver hjälp med Intellytech LiteCloth Mega-6 ställ en fråga nedan och andra användare kommer att svara dig
Lättnad Intellytech Manualer
26 Februari 2025
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
Lättnad Manualer
- Impact
- Perfect Christmans
- DMT
- Yamazen
- Ludeco
- In Lite
- Goobay
- DistriCover
- Mio
- Toshiba
- Godox
- Fun Generation
- CSL
- Amaran
- Geemarc
Nyaste Lättnad Manualer
9 April 2025
9 April 2025
9 April 2025
8 April 2025
8 April 2025
8 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025