Joy-it RB-Case+19 Bruksanvisning

Läs gratis den bruksanvisning för Joy-it RB-Case+19 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 7 recensioner. Har du en fråga om Joy-it RB-Case+19 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
RB-CASE+19
Transparent tower case for Raspberry Pi
1. GENERAL INFORMATION
Dear customer,
thank you for choosing our product. in the following, we will show you how
to use your product.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
This case is perfect for all maker and handicra enthusiasts because it
protects the Raspberry during experiments and test setups.
2. ASSEMBLY
First of all, you should remove the protective lm from both sides gently.
Aer that four synthetic spacers must be pinned and attached with synthetic
nuts.
Now you can apply the Raspberry Pi on the spacers and screw it tight with
four synthetic screws.
First of all, screw together the base plate (plate with wall mount) and the
spacers with threads. You should use the spacers with threads that you can
add the next plate on top of the other.
Repeat the previous steps as oen as the number of Raspberry Pis you wish
to install in the case.

Produktspecifikationer

Varumärke: Joy-it
Kategori: Inte kategoriserad
Modell: RB-Case+19

Behöver du hjälp?

Om du behöver hjälp med Joy-it RB-Case+19 ställ en fråga nedan och andra användare kommer att svara dig