Juki AMS-224EN6030R Bruksanvisning

Juki Symaskin AMS-224EN6030R

Läs gratis den bruksanvisning för Juki AMS-224EN6030R (43 sidor) i kategorin Symaskin. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 1.5 recensioner. Har du en fråga om Juki AMS-224EN6030R eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/43

INSTRUCTION MANUAL

AMS-224EN4530R / AW-3

AMS-224EN6030R / AW-3

CONTENTS

1. GENERAL ...............................................................................................

1 1-1. Specications of AW-3.......................................................................................................1

1-2. Conguration...................................................................................................................... 2

2. INSTALLATION 4

.......................................................................................

2-1. Installation procedure........................................................................................................ 4

2-2. Installation location ...........................................................................................................

3. OPERATION PROCEDURE 10

.................................................................

3-1. Attaching / removing the cover ......................................................................................

3-2. How to thread the device with the bobbin thread .........................................................

3-3. How to set a bobbin .........................................................................................................

3-4. Length of remaining thread to be removed ...................................................................

3-5. Device operation lamp .....................................................................................................

3-6. To use the AW-3 ................................................................................................................

3-7. Behavior of the AW-3 device when the power is turned ON ........................................

3-8. Basic operation and setting ............................................................................................

3-9. Operating the AW .............................................................................................................

3-10. Setting the AW number-of-stitches input mode, AW operation mode and

remaining-thread allowance length ................................................................................

3-11. Example of operation .....................................................................................................

3-12. Turning OFF of the power .............................................................................................

30 3-13. Error display and error handling procedure................................................................ 30

3-14. Detection of errors related to the AW ...........................................................................

3-15. List of errors ...................................................................................................................

4. MAINTENANCE 36

....................................................................................

4-1. Attaching / removing the cover ......................................................................................

4-2. Cleaning ............................................................................................................................

4-3. Replacing the fuse ...........................................................................................................

4-4. Replacing the gripper tube.............................................................................................. 38

4-5. Corrective measure against idling of the bobbin.......................................................... 39

4-6. Adjusting the air ow for the remaining thread guide .................................................

5. TROUBLESHOOTING 40

..........................................................................

– 1 –

1. GENERAL

1 Applicable bobbin, bobbin

case

Exclusive double-capacity bobbin and bobbin case.

2 Applicable thread count #5 to #30 (Japan), 150 to 50 (TEX), 18 to 60 (TKT)

3 Applicable type of thread Synthetic thread

4 Remaining-thread removal and

bobbin winding operation

Possible while the sewing machine is in operation.

5 Condition setting according

to the thread type

Conditions to be met to unravel the thread at the beginning of

winding a bobbin can be set.

6 100,120/200,220,240 Vac ±10 %, Single phase 50/60 HzLine voltage

7 100 VAPower consumption

8 Air pressure used 0.5 MPa

9 Air consumption 156 Nℓ / min (max. value)

10 Dimensions

350 mm (W

)

× 290 mm (L

)

× 270 mm

)

11 Mass of the device 10 kg or less (The main body only. The thread draw-out unit and

control box are excluded.)

Operating temperature range

5 ˚C to 35 ˚C

Operating humidity range

35 % to 85 % (No dew condensation)

14 - Equivalent continuous emission sound pressure level (LNoise pA) at

the workstation : A-weighted value 75 dB ; (Includes K = ≦ pA

2.5 dB) ; according to ISO 10821- C.6.2 -ISO 11204 GR2 at

remaining-thread removal length = 2 m; Bobbin-thread winding

length (22 m).

Conventionally, a series of operations including the replacement of bobbin in the sewing machine hook,

removal of thread remaining on a bobbin, winding of a bobbin, threading of bobbin case tension spring,

and trimming of thread have been carried out manually. Now, this device has been developed to carry

out the series of operations full-automatically. This device not only helps increase efciency of sewing

work but also achieves stable product-making in the process that requires high-quality seams.

Refer to the Instruction Manual for the AMS-224EN4530R/IP-420 for the main body of sewing machine.

1-1. Specications of AW-3

Produktspecifikationer

Varumärke:	Juki
Kategori:	Symaskin
Modell:	AMS-224EN6030R
Färg på produkten:	Wit
Vikt:	22 g
Bredd:	75 mm
Djup:	27 mm
Höjd:	13 mm
LED-indikatorer:	Ja
USB uttag:	Ja
Integrerad minneskortläsare:	Ja
Kompatibla minneskort:	MicroSD (TransFlash)
Marknadspositionering:	Draagbaar
Certifiering:	CE< FCC, RoHS
Typ av enhet:	Draadloze netwerkapparatuur voor mobiele telefonie
Datanätverk:	EDGE, GPRS, HSDPA, HSUPA
Kompatibla operativsystem:	Windows 7\r\nWindows Vista\r\nWindows XP (32/64-bit)\r\nMac OS X 10.4.9+
UMTS-band stöds:	850,1900,2100 MHz
GSM-band stöds:	850,900,1800,1900 MHz
Antal SIM-kort samtidigt:	1
Strömförsörjning via USB:	Ja