Kenwood Excelon CA-PLT98RG Bruksanvisning
Kenwood
Inte kategoriserad
Excelon CA-PLT98RG
Läs gratis den bruksanvisning för Kenwood Excelon CA-PLT98RG (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 9.5 recensioner. Har du en fråga om Kenwood Excelon CA-PLT98RG eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new product.
© 2023 JVCKENWOOD Corporation
CA-PLT98RG
XM160-2-98 AMPLIFIER MOUNTING PLATE DESIGNED AND
ENGINEERED FOR 1998-2013 HARLEY-DAVIDSON® FLTR ROAD GLIDE®
MOTORCYCLES
INSTRUCTION MANUAL
JVCKENWOOD Corporation
Important Notes
©2023 JVCKENWOOD Corporation. All Rights Reserved. KENWOOD® and eXcelon®
are registered trademarks of JVCKENWOOD Corporation. Harley-Davidson®, Electra
Glide®, Road Glide®, Street Glide®, Ultra Classic®, Tri Glide®, CVO™, Screamin Eagle®
and Tour-Pak® are trademarks or registered trademarks of Harley-Davidson, Inc. and/
or its affiliates and if used or implied are for reference only. There is no affiliation
between Harley-Davidson, Inc. and/or its aliates and JVCKENWOOD Corporation
and/or its aliates. All other trademarks are the property of their respective owners.
Specications subject to change without notice.
XM160-2-98 Amplier Mounting Plate Installation
Instructions
Installation procedure
1. Apply one-half of the supplied Velcro to the mounting plate you are installing and the
other half to the back of the amplier.
2. Place the amplier onto the mounting plate.
3. With the outer fairing o, remove the wire harness from the wire “strap” (located on the
brake side of the inner fairing).
NOTE: In this area, a larger factory “Molex” plug (if present) is secured to the frame.
4. Pull down on this Molex plug to unclip it from the frame and let it hang for now (newer
model bikes have this Molex located elsewhere).
NOTE: The “A” arrow in Fig 1.1 shows one of the nuts that need to be removed so that
the adaptor plate can attach onto the 2 main studs. The other nut his hidden behind the
wiring in Fig 1.1
5. Once the plate is on, re-install these nuts to factory torque specications.
6. Secure the wires so they cannot rub against the amplier when the bike is moving.
7. The Molex plug that was removed from the frame can now be re-secured to the other
wire harness using zip ties (if Molex plug is present).
NOTE: Reference the XM160-2-98 manual for amplier wiring instructions.
Fig 1.1
For updated information (the latest Instruction Manual, etc.),
please visit the following website:
https://manual.kenwood.com/en_contents/search/
Produktspecifikationer
| Varumärke: | Kenwood |
| Kategori: | Inte kategoriserad |
| Modell: | Excelon CA-PLT98RG |
Behöver du hjälp?
Om du behöver hjälp med Kenwood Excelon CA-PLT98RG ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Kenwood Manualer
23 Februari 2025
22 Februari 2025
22 Februari 2025
8 Januari 2025
9 December 2024
9 December 2024
27 Oktober 2024
24 September 2024
24 September 2024
21 September 2024
Inte kategoriserad Manualer
- Scandes
- Sensiplast
- Sagemcom
- APSystems
- Creamsource
- ViewZ
- ORCA
- Youin
- Reginox
- AbleNet
- M-Audio
- Lehle
- Bellini
- Matrox
- Aston Microphones
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025