Kiloview RN01 Bruksanvisning
Läs gratis den bruksanvisning för Kiloview RN01 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 12.5 recensioner. Har du en fråga om Kiloview RN01 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
RN01 Chassis
Leading provide solution of IP-based video transmission
Quick Start Guide
Contents
◼ Chassis Installation
◼ Encoding application
◼ Decoding application
Before using this product, it is recommended that you read the guide carefully. To ensure your personal safety and avoid physical or electrical damage to the
device, please strictly follow the instructions of this guide to install and use it under the guidance of professionals. Incorrect electrical connections or physical
installation may cause permanent damage to the device and even threaten personal safety.
1. RN01 Installation
Align the device to the screw holes at the bottom of the chassis, and push in parallel, then tighten the double-
sided screws. Reverse the process for removal.
Note
⚫ The chassis is a plug-in structure, which can easily complete the replacement/mixing of N series codec, realizing the
same chassis compatible with 1/2/3/4 channels and multi-interface, encoding/decoding mixed solutions. The chassis
has no centralize power supply, and each module needs to be powered separately for normal operation.
⚫ Tally-green light: indicates that the current video is in Preview state; red light: indicates that the current video is in
Program state.
⚫ LED indicator. Power: always white indicates that power is connected；LINK: white flashing indicates normal network
access；Run: flashing white indicates normal work in progress.
1.Align and push the encoding card in parallel
2.Tighten the left and right screws
LED indicator
TYPE-C expansion
Tally light
2. Application
2.1 Encoding application
2.2 Decoding application
3. Others
To prolong the device life，please unplug the power and keep it properly if you do not use it for a long time.
SDI Video source
LOOP
Switcher
Network
12V Power supply interface
Monitor
Switcher
NDI
input
Produktspecifikationer
| Varumärke: | Kiloview |
| Kategori: | Inte kategoriserad |
| Modell: | RN01 |
Behöver du hjälp?
Om du behöver hjälp med Kiloview RN01 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Kiloview Manualer
11 December 2024
11 December 2024
25 September 2024
23 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
Inte kategoriserad Manualer
- ShelterLogic
- BIOS Living
- RadonTec
- Maclaren
- DSC
- Aspen
- Merging
- JLCooper
- Enbrighten
- Edge Products
- Könner & Söhnen
- Vacmaster
- Livarno
- Kopp
- Ade
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025