Kiloview RN03 Bruksanvisning
Läs gratis den bruksanvisning för Kiloview RN03 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 7.5 recensioner. Har du en fråga om Kiloview RN03 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
RN03 3RU Video encoding and decoding Chassis
Leading solution provider of IP-based video transmission
Q ck Start Guide ui
Contents
◼ Chassis installation
◼ Encoding Application
◼ Decoding Application
Before using this product, it is recommended that you read the guide carefully. To ensure your personal safety and avoid physical or electrical damage to the
device. Please strictly follow the instructions of this guide or install and use it under the guidance of professionals. Incorrect electrical connections or physical
installation may cause permanent damage to the device and even threaten personal safety.
1. RN03 Installation
Align the card assembly with the card slots and push in vertically, then tighten the double-sided screws.
Reverse the process for removal.
Note
⚫ The chassis is a plug-in structure, which can easily complete the replacement/mixing of N series codec, realizing the
same chassis compatible with 1/2/3/4 channels and multi-interface, encoding/decoding mixed solutions. The chassis
has no centralize power supply, and each module needs to be powered separately for normal operation.
⚫ Tally-green light: indicates that the current video is in Preview state; red light: indicates that the current video is in
Program state.
⚫ The chassis is a plug-in structure, which can easily complete the replacement/mixing of N series codec, realizing the
same chassis compatible with 1/2/3/4 channels and multi-interface, encoding/decoding mixed solutions. The chassis
has no centralize power supply, and each module needs to be powered separately for normal operation.
⚫ LED indicator. Power: always white indicates that power is connected LINK: white flashing indicates normal network ；
access Run: flashing white indicates normal work in progress ；LED indicator.
1.Fasten the device to the mount rack
2. Align and push the device in parallel
12V Fan powered
TYPE-C expansion
Tally light
LED indicator
2. Tighten the left and right screws
2. Application
2 Encoding applications.1
2 Decoding application.2
Note
⚫ The chassis does not provide centralized power supply for the codecs, and each codec needs to be powered separately
for normal operation. The fan is connected to the 12V power supply separately.
SDI Video source
LOOP
12VFa n Powered
Switcher
1 Power supply interface2V
Network
Monitor
Switcher
NDI input
12V Fan powered
12V Powersupply
interface
Produktspecifikationer
| Varumärke: | Kiloview |
| Kategori: | Inte kategoriserad |
| Modell: | RN03 |
Behöver du hjälp?
Om du behöver hjälp med Kiloview RN03 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Kiloview Manualer
11 December 2024
11 December 2024
25 September 2024
23 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
Inte kategoriserad Manualer
- Trace Elliot
- Elro
- ELO
- Pfaff
- Dolmar
- Verbatim
- Commercial Chef
- Melissa
- Wolfcraft
- Technika
- TechLogix Networx
- Steiner
- Bestron
- MTM
- Olimpia Splendid
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025