KitSound Clock Dock Bruksanvisning

KitSound dockningshögtalare Clock Dock

Läs gratis den bruksanvisning för KitSound Clock Dock (3 sidor) i kategorin dockningshögtalare. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 10.5 recensioner. Har du en fråga om KitSound Clock Dock eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

CLOCK DOCK

User Manual -

Before using, please read the manual carefully

MON

Manual Tuner or Automatic

Press “ /T- “ or “ /T

to automatic tuner. The tune

Backward/Forward:

Press “ /T- ”or “ /T

Music selection:

Press “ /T- ”or “ /

Main Features

• Digital clock and alarm clock - with independent snooze and dimmer function

• Digital tune FM Radio

• White LCD display with blue back light

• Compatible with most iPods, with an integrated universal dock for charging your iPod

• Last station, volume and function memory

• Stereo speakers

• 3.5mm audio AUX input jack connected to any por

• 20 station memory presets

• iPhone incoming call alert

• Wake to iPhone/iPod, radio or buzzer

table audio device

TOP VIEW

1. Built-in quality speaker

SIDE VIEW

1. DOCK for iPod and iPho

2. SNOOZE/SLEEP/LIGHT

3. FM ANT -FM antenna

-Power input j

5. -3.5mm auxili

Main Controls

FRONT VIEW

/MEM/SET

- Play and pause/Memory/Clock setting

2. POWER - Power on or off

3. FUNCTION

/T-

/T+

- Mode alternation

4. - Search-/Last/Backward

5. VOL-/AL MODE - Volume down /Alarm mode

6. - Volume up

7. - Search +/ Next/Forward

VOL+

4. 7.6.5.

AUX IN

Power On：

Input DC 5V into the Input S

lab.

Function operation

Music Play:

1. IPHONE operation：

The music station will enter

the music from iPhone/iPod

Pause：

Under “IPHONE/IPOD” m

played or paused, but on th

iPhone incoming call alert:

When there is an incoming

ringtone.

2 . TUNER operation 

Alarm mode setting:

Tap “ /T- “ or “ /T+” and enter into the alarm setting mode TONE/IPOD/RADIO Select the mode and tap （）．

”VOL-/AL MODE” to return to clock mode.

Alarm setting：

Under STAND BY mode, press and hold “VOL-/AL MODE” when there will be time displaying and LCD shinning. Tap

“ /T- “ or “ /T+” to set “hour” and“VOL-/AL MODE”to set “mimute” and then tap“VOL-/AL MODE” again to ，

confirm the setting and return to clock mode.

Clock setting:

Under standby mode, press “ /MEM/SET” and hold it into clock setting, then there will be clock shining on LCD. Tap

“ /T- “or “ /T+” to set “hour” and tap “ /MEM/SET” to set “minute”, then press“ /MEM/SET”again to

confirm the setting and resume to clock mode.

Memory selection:

Press “ /MEM/SET”to alternate the memory channel.

Power supply

DC 5V

AC 100 - 240 V adapter

Tuning system FM 87.5 - 108 MHz

Tuning sensitivity FM < 20 dB

Frequency response

20 Hz - 20 kHz (aux in)

S/N Ratio > 60 dB

Audio output Stereo speaker (1.2 W x 2)

Audio input

iPod dock

3.5 mm auxiliary line in

Specifcations and instructions manual are subject to change without notice.

Manual channel memory：

When get acess to the channels by manual, press “ /MEM/SET”and hold for a while. Press “ /T- “or “ /T+” to

choose the saving location. 20 channles can be memorized and saved.

3. AUX operation

Select AUX under power on and input the external music source to AUX, turn on volume and the music is ready.

Volume:

VOL- and VOL+ can be adjusted within 00-20.

SNOOZE:

When Alarm rings, press “SNOOZE” to set up snooze function. Then alarm pauses and will ring again in 9 minutes, if press

“POWER” at this time, the alarm will stop and terminate.

SLEEP:

Press “SNOOZE/SLEEP/LIGHT” under any mode and then start to set the snooze and select

120M-90M-60M-30M-15M-OFF.

LIGHT:

There are three brightness modes of LCD when the unit is in stand-by.

Specifications:

Produktspecifikationer

Varumärke:	KitSound
Kategori:	dockningshögtalare
Modell:	Clock Dock
Ljudutgång:	Nej
HDMI:	Nej
Kompatibilitet:	iPhone, iPod
Produktens färg:	Röd
Strömkälla av typen:	AC
Brand kompatibilitet:	Apple
Bluetooth:	Nej
Dockningskontakttyp:	Apple 30-pin
Grundläggande enhetstyp:	Smartphone