Kramer CL-8D Bruksanvisning
Läs gratis den bruksanvisning för Kramer CL-8D (4 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om Kramer CL-8D eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
CL-8D Quick Start
Manufacturer
: Kramer Israel
2
Negev St. Airport City 7019900
+972 (0)73
-265-0200
info_il@kramerav.com
EU Importer:
Kramer EMEA Netherlands
Stroombaan 16
, The Garden 1181VX
Amstelveen
info_EMEA@kramerav.com
P/N:
Rev:
1
Scan to go to website
CL-8D Quick Start Guide
This guide helps you install and use your CL-8D for the first time.
Go to http://www.kramerav.com/downloads/CL-8D to download the latest user manual and check if
firmware upgrades are available.
Step 1: Check what’s in the box
1 CL-8D 8” PoE powered Dante
Ceiling Speaker
2 magnetic girls (1 white & 1 black)
1 C-ring + 2 bolts (mounting rails not
included)
1 UL-compliant cable passthrough
(metallic)
1 Silicon cable passthrough
Zip tie for securing the speaker cable
1 Cut-out template
1 Quick start guide
Step 2: Get to know your CL-8D
# Feature Function
1
Speaker
Speakers body
2
Grill
Speaker’s grill
3
Mounting clamps (dog ears)
To be tightened against the back of the ceiling surface to hold the speaker in place
4
RJ45 connector
PoE Ethernet connector
5
Cable tie points
Cable anchor points for strain relief
6
Cable passthrough
Passthrough hole for speaker cable
7
Grill securing hook
Hook for securing the magnetic grill
8
Safety anchor point
Safety anchor points for securing a seismic restraint cable
Step 3: Key Features
• Exceptional sound performance
• Supports PoE++/PoE+/PoE (auto-negotiate)
• Built-in mixer, DSP, and amplifier for two-channel mixing, parametric EQ, High pass and low pass filters, input
compressor, output limiter and advanced power settings
• Features a built-in “Find Me” tone, making it easy to identify and locate individual speakers during installation or
maintenance.
1
2
3
4
5
6
7
8
• Power handling: 10W continuous / 30W peak
• Sound Pressure Level (SPL):
o Sensitivity (1W@1m, free field): 90dB SPL
o Maximum SPL: Continuous: 100dB SPL / Peak: 105dB SPL
• Regulatory compliance:
o UL 2043, IEC62368(CB) / CE LVD, UL62368-1
o FCC/IC, BIS, RCM
o RoHS, REACH, WEEE
• Industrial design: black & white bezel-less magnetic grills included in the box, front-access wiring, removable logo
• Eco-friendly mono-material packaging
Step 4: Achieving the Best Performance
For optimal performance, audio quality, and reliability of the Kramer CL-8D PoE Dante speaker, follow these cabling
guidelines:
Ethernet Cable Requirements
Use high-quality CAT6A or higher, S/FTP or U/FTP shielded, 23 AWG (or thicker) conductors for long runs, rated 60°C+,
and Low Smoke Halogen Free (for plenum/in-wall).
Recommended Kramer Cables
• PC6A-LS508 CAT6A S/FTP Patch Cord (0.15–30m)
• BC-DGKat7a23 CAT7a S/FTP Bulk Cable (23AWG, 100/305m)
• BC-UNIKAT CAT6A U/FTP Bulk Cable, Low Smoke & Halogen Free
Installation Best Practices
• Keep cable length <100m
• Avoid tight bundling or coiling
• Route away from power lines, dimmers, ballasts
• Ensure proper termination and grounding for shielded cables
Step 5: Choosing the Best Location
• Plan the location of the speakers based on the designated listening area.
• Ceiling Type Suitability: Ensure the ceiling is appropriate for mounting the speaker’s weight.
• Obstruction Check: Verify the mounting location is free of obstructions like electrical piping, AC ducts, or water lines.
• Ceiling Clearance: ensure you have sufficient ceiling clearance for installing the speaker.
Step 6: Unpacking
• Carefully remove the speaker and mounting accessories from the packaging.
• Inspect all components for damage before proceeding.
• Dispose of the packaging materials according to regulations.
Step 7: Mounting the Speaker
• Cut the Tile → Mark and cut using the supplied
template.
• Mount Hardware → Place C-ring & rails on the tile,
then set into the ceiling grid and secure.
• Insert Speaker → Fit speaker into the cutout, tighten
dog-ear clamps (do not overtighten).
• Connect Cable → Route CAT cable through grommet,
plug into RJ-45, secure with zip tie/support ears.
• Finish → Attach grill safety wire, then snap magnetic
grill into place.
Step 8: Wiring the Speaker
Your speaker connects to a PoE/PoE+/PoE++ switch using a CAT cable for both network connectivity and power.
Connect the CAT cable to the appropriate port on the switch and the RJ-45 connector on the speaker.
Once connected, the LEDs on the RJ-45 connector will begin to blink, indicating an active connection.
Ensure the total power draw of all connected speakers stays within the PoE budget of the switch. Log in to the switch’s manag
ement
interface to confirm the available PoE capacity.
T-channel Grid
Support Ring
Screws
Ceiling Tile
Tile Rails
C-ring
Produktspecifikationer
| Varumärke: | Kramer |
| Kategori: | högtalare |
| Modell: | CL-8D |
Behöver du hjälp?
Om du behöver hjälp med Kramer CL-8D ställ en fråga nedan och andra användare kommer att svara dig
högtalare Kramer Manualer
19 Oktober 2025
19 Oktober 2025
10 September 2025
10 September 2025
10 September 2025
10 September 2025
10 September 2025
10 September 2025
10 September 2025
10 September 2025
högtalare Manualer
- EarFun
- Kidsmill
- NHT Audio
- Andersson
- Alfatron
- Madison
- Strong
- Martin Logan
- KRK
- Blaupunkt
- Aurum
- Lemus
- HK Audio
- Midland
- Proscan
Nyaste högtalare Manualer
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
17 Oktober 2025