Krowne 10-410L Bruksanvisning
Läs gratis den bruksanvisning för Krowne 10-410L (4 sidor) i kategorin Kran. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 2 recensioner. Har du en fråga om Krowne 10-410L eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
4” Center Wall Mount Faucet
Installation Manual
10-4 Faucets
Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
10-4 Faucets Installation Manual
Installation Instructions
1. Turn off water supply at main source before proceeding with installation.
2. Apply thread sealant tape or pipe joint compound to the ends of each threaded nipple . (A)
3. From the front of the sink, insert the threaded nipples into the faucet holes in the sink.
4. From the back of the sink, place the included rubber washer, rosette, and ange nut in
the mounting kit onto the threaded nipples and tighten with a wrench. (B) (A)
5. From the front of the sink, install the spout and tighten properly onto the faucet body . (C) (D)
6. From the back of the sink, install the water supply lines and tighten properly.
Note: Before starting installation, if you would like water lines included with your kit, please order
Krowne’s E-Z Install Flexible Water Line Kit with Mounting Hardware (model 21-443L). These kits
do not use thread sealant tape or pipe joint compound. Kits come with 1/2” compression 90°
ttings on one side and 3/8” compression ttings that secure directly onto the supply stops.
These are available in 22”, 24” and 30” lengths.
WARNING: Plumbing connections should be made by qualified personnel
who will observe all applicable plumbing, sanitary and safety codes.
C
D
Sink/Mounting
Surface
A
B
Black Rubber Washer
Rosette Flange Nut
Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
10-4 Faucets Installation Manual
Scan to view
aerator options
Parts Guide
Accessories
1
4
2
3
No. Model Description
1 19-220L 6” Swing Spout
1 19-221L 8” Swing Spout
1 19-222L 10” Swing Spout
1 19-223L 12” Swing Spout
1 19-224L 14” Swing Spout
No. Model Description
1 19-225L 16” Swing Spout
1 19-226L 18” Jointed Spout
1 19-227L 3-1/2”W Gooseneck Spout
1 19-228L 6”W Gooseneck Spout
1 19-229L 8-1/2”W Gooseneck Spout
No. Model Description
2 21-300L Silver Series 1/4 Turn Ceramic Valves (full hot & cold valves with handles)
3 21-305 Lever Handle Kit (hot & cold handles only)
4 21-194L Wall Mounting Kit (includes 2 each: nipples, lock nut, rosette, washer)
Model Description
21-312 Wrist Blade Handle Kit (includes hot & cold handles)
21-443L E-Z Install Flexible Water Line Kit
25-150 Thread Sealant Tape
20-302 Replacement Washer Set
Produktspecifikationer
| Varumärke: | Krowne |
| Kategori: | Kran |
| Modell: | 10-410L |
Behöver du hjälp?
Om du behöver hjälp med Krowne 10-410L ställ en fråga nedan och andra användare kommer att svara dig
Kran Krowne Manualer
25 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
Kran Manualer
- T&S
- Ernesto
- Elkay
- Fala
- Mizzo
- Livarno
- ProFlo
- KitchenAid
- Vola
- Peerless-AV
- Rohl
- Rogerseller
- Zurn
- Curaqua
- WillieJan
Nyaste Kran Manualer
25 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025