Kyoritsu KEW 5711 Bruksanvisning
Läs gratis den bruksanvisning för Kyoritsu KEW 5711 (1 sidor) i kategorin Detektor. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 3.9 stjärnor baserat på 8 recensioner. Har du en fråga om Kyoritsu KEW 5711 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1

05-16
Before starting to use the instrument, perform the following
preliminary check for your safety.
● Check for any abnormalities or damages on the instrument.
● Press button to confirm LED light is turned on.
● Test on a known power supply to ensure the glow tip
illuminates in red and buzzer beeps.
● The red light flashes quickly five times if the batteries need
changing. Replace the old batteries with new ones to perform
further use.
● Self-Function test
This instrument performs self-function test when button is
pressed. When abnormality is found at the test, it gives 3
short beeps, 3 long beeps, 3 short beeps (Morse code for
SOS); the abnormality may be either temporary or
permanent. Such an alert may be given when pressing the
button while the instrument is sensing voltage. Stop using the
instrument if buzzer produces SOS Morse code sound and
verify proper operation on a known power supply.
Kyoritsu reserves the rights to change specifications or
designs described in this manual without notice and
without obligations.
Abnormality is detected within
the instrument.
Produktspecifikationer
Varumärke: | Kyoritsu |
Kategori: | Detektor |
Modell: | KEW 5711 |
Behöver du hjälp?
Om du behöver hjälp med Kyoritsu KEW 5711 ställ en fråga nedan och andra användare kommer att svara dig
Detektor Kyoritsu Manualer
18 September 2024
Detektor Manualer
- STI
- FireAngel
- Techno Line
- Toolcraft
- Soler And Palau
- Leica
- Joy-it
- System Sensor
- Sanwa
- Grothe
- Multimetrix
- Ferguson
- Voltcraft
- Gamma Scout
- Flir
Nyaste Detektor Manualer
2 Augusti 2025
1 Augusti 2025
31 Juli 2025
31 Juli 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
27 Juli 2025
27 Juli 2025