La Crosse Technology 308-1911V2 Bruksanvisning

Läs gratis den bruksanvisning för La Crosse Technology 308-1911V2 (2 sidor) i kategorin Termometer. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 9 recensioner. Har du en fråga om La Crosse Technology 308-1911V2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

TIME ALARM

1. Hold the ALARM button to enter alarm time set mode. The

hour will flash. Press the + or - button to adjust alarm hour.

2. Press the ALARM button to confirm and move to minutes.

Press the + or - button to adjust the alarm minutes.

3. Press the ALARM button to confirm and exit.

Note: When you finish alarm settings, the alarm is active. The

bell icon will show.

Activate/Deactivate Alarm:

• From normal time display, press and release the ALARM

button to deactivate or to activate the alarm. The alarm

time will show for 2 seconds.

• When active, the Bell Icon will show.

• When the icon is not showing, the alarm is not active and

will not go o.

Page | 2Page | 3Page | 4

Indoor Temperature and Humidity Station

Model: 308-1911v2

DC:011618

POWER UP

1. Insert 2 AAA batteries into the back of the station.

2. Set language, time, calendar, and temperature units.

• Hold the SETTINGS button to enter settings mode.

• Press the + or - button to adjust the values.

• Press the SETTINGS button to confirm adjustments and move

to the next item.

• Press the ALERTS button at any time to exit.

Setting menu order:

1. Language (English | Español | Francais)

2. Beep ON/OFF

3. Hour

4. Minutes

5. Year

6. Month

7. Date

8. Temp Fahrenheit / Celsius

SETTINGS

SET HI/LO HUMIDITY ALERT

Set Alerts:

1. Hold the ALERTS button 2 seconds to enter alert setting.

2. HI Humidity Alert OFF will show. Press the + button to arm

the alert in order to set it.

If you do not wish to arm the alert, press the ALERTS Note:

button to move to the LO Humidity alert.

3. When HI ALERT ON is showing, press the + or – buttons to

adjust alert value.

4. Press ALERTS to move to the LO Humidity Alert. Press

ALERTS button again to exit if you do not want to set a LO

Humidity Alert.

Arm/Disarm Humidity Alerts:

1. Hold the ALERTS button 2 seconds to view HI Humidity

2. Press the button to arm an alert. +

3. Press the button to disarm an alert. –

4. Press ALERTS button to move to the LO Humidity alert.

5. Press the button to arm an alert. +

6. Press the button to disarm an alert.–

AAA

AAA

CUSTOM WEEKDAY | DATE DISPLAY

• Press and release the SETTINGS button to display either

the full Weekday, or three letter Weekday, Month, & Date.

• The station will remain on the date display chosen.

Produktspecifikationer