Lancom GS-3152X Bruksanvisning

Läs gratis den bruksanvisning för Lancom GS-3152X (2 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 5 recensioner. Har du en fråga om Lancom GS-3152X eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

TECHNICAL DATA

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This docu-

ment contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111580/0120

Hardware

Power supplyInternal power supply unit (100–240 V, 50-60 Hz, 1 A max.)

Power consumptionMax. 65 W

EnvironmentTemperature range 0–40° C; humidity 10–90 %, non-condensing

HousingRobust metal housing, 1 HU with removable mounting brackets for 19“ installation,

442 x 44 x 300 mm (W x H x D)

Number of fans1

Interfaces

ETH

SFP+

A48 TP Ethernet ports 10 / 100 / 1000 Mbps

A4 SFP+ ports 1 / 10 Gbps

A52 concurrent ports in total

Declaration of Conformity

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with

Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of

Conformity is available at the following Internet address: www.lancom-systems.com/doc

Package Content

ManualQuick Reference Guide (DE/EN), Installation Guide (DE/EN)

Mounting bracketsTwo 19” brackets for rack mounting;

If an additional rear support surface is required for more stable mounting of the switch, please use the

LANCOM Switch Rack Mount L250, item no.: 61432, which is available as an accessory.

CableIEC power cord 230 V, serial configuration cable 1.5 m

MOUNTING AND CONNECTING THE DEVICE

Reset

aConfiguration interface (Console)

Connect the configuration interface via the included serial

configuration cable to the serial interface of the device you want to

use for configuring / monitoring the switch.

bTP Ethernet interfaces

Use Ethernet cables to connect the interfaces 1 to 48 to your PC or

a LAN switch.

cSFP+ interfaces

Insert suitable LANCOM SFP modules into the SFP+ inter-

faces 49 to 52. Choose cables which are compatible with the

SFP modules and connect them as described in the module’s

documen tation.

dPower connector (device back side)

Supply power to the device via the power connector. Please use

the IEC power cable supplied or a country-specific LANCOM

Power Cord.

D

D

D

DD

4

Please observe the following when setting up the device

AThe mains plug of the device must be freely accessible.

AFor devices to be operated on the desktop, please attach the adhesive rubber

footpads.

ADo not rest any objects on top of the device and do not stack multiple devices.

AKeep the ventilation slots on the side of the device clear of obstruction.

AMount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

If an additional rear support surface is required for more stable mounting of the switch, please use the

LANCOM Switch Rack Mount L250.

APlease note that support for third-party accessories (SFP and DAC) is not provided.

LANCOM GS-3152X

Quick Reference Guide

C ud eadylo-r

d 10 G SFP+ ports

OffPort inactive or disabled

BlueLink 10 Gbps

Blue, blinkingData transfer, link 10 Gbps

GreenLink 1 Gbps

Green, blinkingData transfer, link 1 Gbps

c TP Ethernet ports

OffPort inactive or disabled

GreenLink 1000 Mbps

Green, blinkingData transfer, link 1000 Mbps

OrangeLink ≤ 100 Mbps

Orange, blinkingData transfer, link ≤ 100 Mbps

bReset button

Pressed until all port

LEDs are off

Device restart

Pressed until all port

LEDs glow permanently

Configuration reset and device restart

a System LED

OffDevice powered off

GreenDevice operational

RedHardware error

bdca c

b ca

Reset

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

Produktspecifikationer