Lancom GS-3152XSP Bruksanvisning

Läs gratis den bruksanvisning för Lancom GS-3152XSP (2 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 4 recensioner. Har du en fråga om Lancom GS-3152XSP eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

TECHNICAL DATA

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks

of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for

technical errors and / or omissions. 111584/0120

Hardware

Power supplyExchangeable power supply (110-230 V, 50-60 Hz)

Power consumptionMax. 920 W when using one PSU, max. 1840 W when using two PSUs

EnvironmentTemperature range 0–40° C; short term temperature conditions 0–50°C; humidity 10–90%;

non-condensing

HousingRobust metal housing, 19“ 1U (442 x 44 x 440 mm > W x H x D) with removable mounting

brackets, network connectors on the front

Number of fans2 (3 when using 2 PSUs)

Interfaces

ETH

SFP

A48 TP Ethernet ports 10/100/1000 Mbps

A4 10 G SFP+ ports 1 / 10 Gbps

A52 concurrent ports in total

Declaration of Conformity

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in

compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of

the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc

Package Content

DocumentationQuick Reference Guide (DE/EN), Installation Guide (DE/EN)

Mounting bracketsTwo 19” brackets for rack mounting;

If an additional rear support surface is required for more stable mounting of the switch,

please use the LANCOM Switch Rack Mount L250, item no.: 61432, which is available as an

accessory.

Power supply unit1x exchangeable power supply LANCOM SPSU-920

(expandable up to 2 PSUs for redundancy / higher PoE budget)

Cable1 IEC power cord, 1 serial configuration cable 1.5 m

MOUNTING AND CONNECTING THE DEVICE

d 10 G SFP+ ports

OffPort inactive or disabled

BlueLink 10 Gbps

Blue, blinkingData transfer, link 10 Gbps

GreenLink 1 Gbps

Green, blinkingData transfer, link 1 Gbps

c TP Ethernet ports

LEDs switched to Link/Act/Speed mode

OffPort inactive or disabled

GreenLink 1000 Mbps

Green, blinkingData transfer, link 1000 Mbps

OrangeLink < 1000 Mbps

Orange, blinkingData transfer, link < 1000 Mbps

LEDs switched to PoE mode

OffPort inactive or disabled

GreenPort enabled, power supply to connected

device

OrangeHardware error

b ca

aConfiguration interface (Console)

Connect the configuration interface via the included serial

configuration cable to the serial interface of the device you want to

use for configuring / monitoring the switch.

bTP Ethernet interfaces

Use Ethernet cables to connect the interfaces 1 to 48 to your PC or

a LAN switch.

cSFP+ interfaces

Insert suitable LANCOM SFP modules into the SFP+ inter faces

49 to 52. Choose cables which are compatible with the SFP

modules and connect them as described in the module’s

documen tation.

dPower supply modules with power connectors

(device back side)

Supply power to the device via the power connectors of the

power supply modules on the device’s back side. Please use the

IEC power cables supplied (not for WW devices) or country-

specific LANCOM Power Cords.

DC

OK

AC

OK

D

D

D

DD

4

Please observe the following when setting up the device

AThe mains plug of the device must be freely accessible.

AFor devices to be operated on the desktop, please attach the adhesive rubber

footpads.

ADo not rest any objects on top of the device and do not stack multiple devices.

AKeep all ventilation slots of the device clear of obstruction.

AMount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

If an additional rear support surface is required for more stable mounting of the switch, please use the

LANCOM Switch Rack Mount L250.

APlease note that support for third-party accessories (SFP and DAC) is not provided.

LANCOM GS-3152XSP

Quick Reference Guide

C ud eadylo-r

bMode/Reset button

Short pressPort LED mode switch

~5 sec. pressedDevice restart

7~12 sec. pressedConfiguration reset and device restart

a System / PWR A / PWR B / Link/Act/Speed / PoE

System: offDevice powered off

System: greenDevice operational

System: redHardware error

PWR A / PWR B: off

PWR A / PWR B: green

Link/Act/Speed: greenPort LEDs show link / activity status or

port speed

PoE: greenPort LEDs show PoE status

bdca c

DC

OK

AC

OK

e f

e f Power supply unit LEDs

DC OK: green, blinkingSecondary power supply OK

DC OK: red, blinkingSecondary power supply failure

AC OK: green, blinkingPrimary power supply OK

AC OK: red, blinkingPrimary power supply failure

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

Produktspecifikationer