Lewitt LCT 240 Bruksanvisning
Läs gratis den bruksanvisning för Lewitt LCT 240 (1 sidor) i kategorin Telefon. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 9.5 recensioner. Har du en fråga om Lewitt LCT 240 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
// LCT 240
QUICKSTART GUIDE
SMALL PRICE
BIG SOUND
HIGHLY VERSATILE
STUDIO AND LIVE MICROPHONE
// User interface
1 Status indicator // white offIlluminated in : The microphone is in normal working mode. Illumination is : Key-lock active.
Illumination fl ashes in red: The microphone is experiencing clipping due to high SPL. Illumination in : The microphone is in red
automatic attenuation mode. Illumination fl ashes in white and red: The microphone indicates the clipping history.
2 Attenuation indicator // The current attenuation level is illuminated.
3 Attenuation push button // Choose between 0 dB, -10 dB and -20 dB by pushing the left button. Attenuation is used in
high SPL environments in order to prevent clipping of the microphone, mixer and other audio equipment.
4 Low-cut fi lter indicator // The current low-cut fi lter is illuminated.
5 Low-cut fi lter push button // Choose between linear, 40 Hz (12 dB/oct) and 300 Hz (6 dB/oct) by pushing the
right button. Low-cut fi lters eliminate unwanted low frequency noise such as structure borne noise, wind and handling
noise. Do not forget to use the supplied windshield if suitable.
To learn about the key-lock function clipping history, and automatic attenuation please read the full manual following
the link at the bottom.
// Getting started
1 Connect your microphone to your mixing console, audio interface
or microphone preamplifi er using a 3-pin XLR cable.
2 Supply the LCT 240 with 48V phantom power.
3 Choose your settings.
4 You are ready to go!
// Overview
// Compact condenser microphone
// Cardioid polar pattern for effective isolation of the main sound source
// Noiseless pushbuttons for quick and easy attenuation and low-cut
fi lter selection
// 3 low-cut fi lter settings: linear, 40 Hz (12 dB/oct), 300 Hz (6 dB/oct)
// 3 pre-attenuation settings: 0 dB, -10 dB, and -20 dB
// High dynamic range and low self-noise level
// Illuminated user interface for easy handling in dark environments
// Gold plated & corrosion-resistant 3-pin XLR output connector
Top applications // Vocals, acoustic instruments,
spoken word and podcasting
// Please Note
// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures.
// Do not apply excessive force on the switches or the connected cable.
// When disconnecting the microphone cable, grasp the connector and do not pull the cable.
// Do not attempt to modify or fi x the microphone, as it would void your product warranty.
// The casing of the microphone can be cleaned easily using a wet cloth,
never use alcohol or another solvent for cleaning.
// The windshield can be washed with soap water, if necessary.
READ THE
FULL MANUAL!
Learn Everything about your LCT 240
www.lewitt-audio.com/resources/manuals/LCT-240.pdf
LEWITT
®
Burggasse 79
1070 Vienna
Austria
www.lewitt-audio.com
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
1
2
3
4
5
Produktspecifikationer
| Varumärke: | Lewitt |
| Kategori: | Telefon |
| Modell: | LCT 240 |
Behöver du hjälp?
Om du behöver hjälp med Lewitt LCT 240 ställ en fråga nedan och andra användare kommer att svara dig
Telefon Lewitt Manualer
26 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
Telefon Manualer
- Pioneer
- RCA
- Viking
- Essentiel B
- Tecdesk
- Fenton
- Olympia
- Bintec-elmeg
- Infiniton
- HUMANTECHNIK
- VTech
- Vimar
- Planet
- Marquant
- Telefunken
Nyaste Telefon Manualer
16 September 2025
15 September 2025
12 September 2025
10 September 2025
10 September 2025
9 September 2025
8 September 2025
8 September 2025
7 September 2025
7 September 2025