Lewitt MTP 740 CM Bruksanvisning
Sidor 1 Engels Telefon
Läs bruksanvisningen för Lewitt MTP 740 CM gratis online eller ladda ner PDF:en. 31 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
// Overview
// Handheld large diaphragm condenser microphone
// Cardioid polar pattern for effective isolation of the main sound source
// Flat frequency response for natural sound
// 2 pre-attenuation settings: 0 dB, -10 dB
// 2 low-cut settings: linear, 80 Hz (6 dB/oct)
// LED status indicator for low-cut and pre-attenuation settings
// Integrated acoustic pop and windshield - washable
// Solid full-metal, die-cast body
// Gold plated & corrosion-resistant 3-pin XLR output connector
Top applications //Vocals, acoustic instruments, studio & live
applications, spoken word and live interviews
// User interface
1LED status indicator// Indicates active low-cut fi lter (A) and
pre-attenuation setting (): B
A1: linear A2: 80Hz (6 dB/oct)
B1B2: 0 dB attenuation : -10 dB attenuation
2LED slide switch//The LED status indicator can be turned on/off
using the slide switch.
3Attenuation level slide switch//Choose the attenuation level
by adjusting the slide switch. Attenuation levels are: 0 dB and -10 dB.
Attenuation is used in high SPL environments in order to prevent
clipping of the microphone, mixer and other audio equipment.
4Low-cut fi lter slide switch Choose between linear and //
80 Hz (6 dB/oct) settings by adjusting the slide switch. Low-cut
fi lters eliminate low-frequency sounds to compensate the proximity
effect and reduce structure-borne noise.
1
2
3
4
1
A
12
B
LEWITT
®
Burggasse 79
1070 Vienna
Austria
www.lewitt-audio.com
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
// Getting started
1Connect your microphone to your mixing console, audio interface
or microphone preamplifi er with a 3-pin XLR cable.
2Supply the MTP 740 CM with 48V phantom power.
3Set the input gain on your mixing console, preamp, etc. accordingly.
4To ensure best sound quality, do not cover any part of the grille.
// Please Note
// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures.
// Do not apply extensive force on the switches or cable of the microphone.
// Do not attempt to modify or fi x the microphone, as it would void your product warranty.
// The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent for cleaning.
// The integrated acoustic pop and windshield can be washed with soap water, if necessary.
READ THE
FULL MANUAL!
LEARN EVERYTHING ABOUT YOUR MTP 740 CM
www.lewitt-audio.com/resources/manuals/MTP-740-CM.pdf
// MTP 740 CM
QUICKSTART GUIDE
STUDIO TECHNOLOGY
ON STAGE
HANDHELD PERFORMANCE MICROPHONE
WITH 1-INCH STUDIO CONDENSER CAPSULE
Produktspecifikationer
| Varumärke: | Lewitt |
| Kategori: | Telefon |
| Modell: | MTP 740 CM |
Behöver du hjälp?
Om du behöver hjälp med Lewitt MTP 740 CM ställ en fråga nedan och andra användare kommer att svara dig
Telefon Lewitt Manualer
Lewitt LCT 340 Bruksanvisning Lewitt LCT 540 S Bruksanvisning Lewitt MTP 940 CM Bruksanvisning Lewitt LCT 1040 Bruksanvisning Lewitt LCT 240 Bruksanvisning
Telefon Manualer
Nyaste Telefon Manualer
Snom D892M Bruksanvisning Snom HM2 Bruksanvisning Snom HD340 Bruksanvisning Speco Technologies AVS01KIT Bruksanvisning ClearOne XAP 800 Bruksanvisning Snom M500 Bruksanvisning Snom M900 Bruksanvisning Doro Congress 200 Bruksanvisning Doro Magna 2005 AHS Bruksanvisning Plantronics KIRK 7010 Bruksanvisning