Liftmaster 371LM Bruksanvisning

Liftmaster Inte kategoriserad 371LM

Läs gratis den bruksanvisning för Liftmaster 371LM (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 9 recensioner. Har du en fråga om Liftmaster 371LM eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/8

Single Button Remote Control

Model 371LM

3-Button Remote Control

Model 373LM

TO ERASE ALL CODES FROM MEMORY

SECURITY+

REMOTE CONTROLS

MODELS 371LM AND 373LM

To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:

• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate,

or play with remote controls.

• Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are

no obstructions to door travel.

• ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to

cross path of moving gate or door.

Press and hold the button

on the remote control

that you wish to use.

“click”

Release the button

when the garage

door opener lights

blink or two clicks

are heard.

If programming to

other products,

press the button a

second time to

activate the product.

Locate the

Smart/Learn

button.

Press and

immediately release

the learn button.

The learn LED will glow

steadily for 30 seconds.

Within 30 seconds...

PROGRAMMING THE REMOTE CONTROL

For use with garage door openers, gate operators or other products that are 315 MHz Security+

Compatible with garage door openers that have a purple learn button. The code between the remote

control and the receiver changes with each use, randomly accessing over a billion new codes. Refer

to your product manual for the location of the learn button.

NOTE: Your product may look different than the products illustrated in this manual.

TO CONTROL THE GARAGE DOOR OPENER LIGHTS

With the door closed,

press and hold

the remote

control button

that you want to

control the light.

LOCK

LIGHT

Press and

hold the

light button

on the

door control.

LOCK

LIGHT

Press and

hold the

lock button

on the

door control.

After the garage

door opener

lights ﬂash,

release all

buttons.

“click”

This feature is only available on garage door openers equipped with a multi-function door control and a remote control with more than one button. Not available with universal receiver.

With Security+

remote controls, a remote control button can be programmed to operate the garage door opener lights without opening the door.

Test by pressing the remote control button. The garage door opener lights should turn on or off but the door should not move.

When deactivating any unwanted remote control code, all previous codes will be erased.

Press and hold the learn button

on garage door opener or other

product until the learn LED goes

out (approximately 6 seconds).

All previous codes are now erased.

Reprogram each remote control

you wish to use.

WARNING: This product can expose you to chemicals including lead, which are known to the State