Liftmaster 485LMC Bruksanvisning


Läs gratis den bruksanvisning för Liftmaster 485LMC (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 9 recensioner. Har du en fråga om Liftmaster 485LMC eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Battery Replacement Instructions
1. Disconnect power to opener.
2. Using a Phillips head screwdriver, remove the battery cover
on the motor unit.
3. Remove old battery and discard.
4. Partially insert new battery into motor unit with terminals
facing out.
5. Connect red (+) and black (-) wires from motor unit to
corresponding terminals on battery.
6. Replace battery cover.
7. Reconnect power.
LEAD
RETURN
RECYCLE
Pb
To reduce the risk of FIRE or INJURY to persons:
Disconnect ALL electric and battery power BEFORE
performing ANY service or maintenance.
Use ONLY LiftMaster 485 Series batteries for replacement.
DO NOT dispose of battery in fire. Battery may explode.
Check with local codes for disposal instructions.
ALWAYS wear protective gloves and eye protection when
changing the battery or working around the battery
compartment.
WARNING: This product can expose you to chemicals including
lead, which are known to the State of California to cause cancer
or birth defects or other reproductive harm. For more informa-
tion go to www.P65Warnings.ca.gov


Produktspecifikationer

Varumärke: Liftmaster
Kategori: Inte kategoriserad
Modell: 485LMC

Behöver du hjälp?

Om du behöver hjälp med Liftmaster 485LMC ställ en fråga nedan och andra användare kommer att svara dig