Lorex ETP-01T Bruksanvisning
Lorex
Inte kategoriserad
ETP-01T
Läs gratis den bruksanvisning för Lorex ETP-01T (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 12.5 recensioner. Har du en fråga om Lorex ETP-01T eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Package
ETP-01T (Transmitter)
ETP-01R (Receiver)
Quick Start
Guide
Hardware Overview
Overview
ETP-01 Series are High-Speed, long distance Ethernet & PoE extender
that makes possible to transmit the Ethernet signal and PoE up to
300m through single pair of twisted wires.
It is cost-effective and time saving solution to migrate existing
analog system to IP based system since ETP-01 series support easy
installation utilizing the existing UTP bundle cables or any single
twisted pair cables.
With long distance transmission feature, the device makes to
overcome 100 meters distance limitation easily and reduces the
construction cost significantly compared with fiber optic configuration.
Features
Long reach Ethernet & PoE extension over existing 2-Wire twisted
cable
Data + Power over twisted cable
Data and PoE distance up to 300 m
100Mpbs Full Duplex
PoE, PoE+, Extra PoE (Max. 60W PoE output, ETP-01T model only
with DC Power adapter)
LED Indication (Data, Power)
Plug & Play
Surge Protection
Support PoE, PoE+ Input (25.5W) from PoE Switch / PoE NVR
(ETP-01R model only)
Slim design
Quick Start Guide
ETP-01T / ETP-01R
Please read carefully the instruction manual before use.
Contents of this manual are subject to change without prior
notice for reasons such as functionality enhancements.
Installation Guide
1. Connect Ethernet cable (Cat5e or better) from PoE Switch/NVR to
ETP-01R. Check LEDs on ETP-01R.
Ethernet cable
(Cat5e or better)
2-Wire Twisted cable
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
2. Connect single twisted pair cable to ETP-01R.
Connect single twisted pair cable from ETP-01R to ETP-01T.
Ethernet cable
(Cat5e or better)
2-Wire Twisted cable
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
3. Connect Ethernet cable (Cat5e or better) from ETP-01T to IP
Camera. Check LEDs on ETP-01T.
Î
Set ETP-01T, PoE Switch ON to supply direct power to IP camera.
Set ETP-01T, PoE Switch OFF to connect PC or network switch
devices.
Ethernet cable
(Cat5e or better)
2-Wire Twisted cable
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
LED Indicators
Indicator Color Function
LINK
Ethernet Data Act
ACT
Ethernet Connect Act
Attention polarity( , ).
Rev.4.0
Right
Left
Top
상태 표시등 상태 표시등
LINK
ACT
RJ45
DC 전원 어댑터Teminal 커넥터
제품 고정
나사용 홀
제품 고정
나사용 홀
PoE 스위치 ON/OFF
(ETP-01T 만 해당)
Status LED Indicator
LINK
Status LED Indicator
ACT
DC Power JackTeminal connector
PoE Switch ON/OF
(ETP-01T only)
Mounting
Screw Hole
Mounting
Screw Hole
Produktspecifikationer
| Varumärke: | Lorex |
| Kategori: | Inte kategoriserad |
| Modell: | ETP-01T |
Behöver du hjälp?
Om du behöver hjälp med Lorex ETP-01T ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Lorex Manualer
17 Februari 2025
31 Januari 2025
29 Januari 2025
29 Januari 2025
8 Januari 2025
28 September 2024
25 September 2024
25 September 2024
24 September 2024
22 September 2024
Inte kategoriserad Manualer
- Kugoo
- Skil
- Rolly Toys
- Duronic
- Cadac
- Crimson
- Verto
- Fissler
- Omnires
- Husky
- Mircom
- Leitz
- Hifonics
- KM-fit
- Velbus
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025