Lorex EUP-01T Bruksanvisning
Lorex
Inte kategoriserad
EUP-01T
Läs gratis den bruksanvisning för Lorex EUP-01T (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 15 recensioner. Har du en fråga om Lorex EUP-01T eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Hardware Overview
Package
EUP-01T (Transmitter)
EUP-01R (Receiver)
Quick Start
Guide
Overview
EUP-01 Series are High-Speed, long distance Ethernet & PoE extender
that makes possible to transmit the Ethernet signal and PoE up to
400m through UTP cable. It is cost-effective and time saving solution
to migrate existing system to IP based system since EUP-01 series
support easy installation utilizing the existing UTP cables. With long
distance transmission feature, the device makes to overcome 100
meters distance limitation easily and reduces the construction cost
significantly compared with fiber optic configuration.
Features
Long reach Ethernet & PoE extention over UTP cable
Data + Power over UTP cable
Data & PoE distance up to 400m
Data up to 100Mbps
100Mbps Full Duplex
Multicast ready
PoE, PoE+, Extra PoE (Max. 60W PoE output, EUP-01T model only
with DC Power adaptater
PoE ON/OFF Switch (EUP-01T only)
LED Indication (Data, Power)
Plug & Play
Built-in surge protection
Support PoE, PoE+ Input (25.5W) from PoE Switch / PoE NVR
Slim design
Quick Start Guide
EUP-01T / EUP-01R
Please read carefully the instruction manual before use.
Contents of this manual are subject to change without prior
notice for reasons such as functionality enhancements.
Installation Guide
1. Connect Ethernet cable (Cat5e or better) from PoE Switch/NVR to
EUP-01R. Check LEDs on EUP-01R.
Ethernet cable
(Cat5e or better)
Ethernet cable
(Cat5e or better)
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
2. Connect Ethernet cable to EUP-01R.
Connect Ethernet cable from EUP-01R to EUP-01T.
Ethernet cable
(Cat5e or better)
Ethernet cable
(Cat5e or better)
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
3. Connect Ethernet cable (Cat5e or better) from EUP-01T to IP
Camera (PoE Model Only). Check LEDs on EUP-01T.
Î
Set EUP-01T, PoE Switch ON to supply direct power to IP camera.
Set EUP-01T, PoE Switch OFF to connect PC or network switch
devices.
Ethernet cable
(Cat5e or better)
Ethernet cable
(Cat5e or better)
PoE Switch/NVR
Check LEDs
Check LEDs
Ethernet cable
(Cat5e or better)
LED Indicators
Indicator Color Function
LINK Ethernet Data Act
ACT Ethernet Connect Act
Rev.1.0
Right
Left
Top
상태 표시등
LINK
상태 표시등
ACT
RJ45
DC 전원 어댑터 RJ45
제품 고정
나사용 홀
제품 고정
나사용 홀
PoE 스위치 ON/OFF
(EUP-01T 만 해당)
Status LED Indicator
LINK
Status LED Indicator
ACT
DC Power Jack
PoE Switch ON/OF
(EUP-01T only)
Mounting
Screw Hole
Mounting
Screw Hole
Produktspecifikationer
| Varumärke: | Lorex |
| Kategori: | Inte kategoriserad |
| Modell: | EUP-01T |
Behöver du hjälp?
Om du behöver hjälp med Lorex EUP-01T ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Lorex Manualer
17 Februari 2025
31 Januari 2025
29 Januari 2025
29 Januari 2025
8 Januari 2025
28 September 2024
25 September 2024
25 September 2024
24 September 2024
22 September 2024
Inte kategoriserad Manualer
- RIX
- Motu
- WeFix
- Arendo
- Vulcan
- Louis Tellier
- Kincrome
- BMW
- Stamos
- Phanteks
- DOK
- RF-Links
- Sirius
- Exo-Terra
- Seco-Larm
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025