Louis Tellier 208040 Bruksanvisning


Läs gratis den bruksanvisning för Louis Tellier 208040 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 10.5 recensioner. Har du en fråga om Louis Tellier 208040 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
208040 en ma 2012.09
*208.040 TRITURATOR - MANUAL
MOULIN N°10
INSTRUCTIONS
DISMANTLING
Casing:
Press slightly on one of the two fastening lugs and release
from side of hopper
Hopper and Cross-piece:
Press on the two holding springs, in order to have the clips
drop down by themselves.
Shaft:
Pull it out by rotating it clockwise, in order to keep clear of
the stopping blade.
Sieve:
Seize it in bath hands by the outer side and unfasten
anticlockwise with a dead blow.
NOTE
When the machine is new, the inside of the sieve is rough, in
order to make the L.T. TRITURATOR effective.
On the contrary, when the inside of the sieve is becoming
smooth, it must be replaced.
P10006
handle
P10003
central spiral spring / shaft
P10001
hopper
P10010
15-20-30-40
sieve
P10004
anti-splash cylinder
M5003
holding spring
P10007
tripod with holding spring
P10005
cross-bar
full-sized sieve perforations
1 mm 1,5 mm 2 mm 3 mm 4 mm


Produktspecifikationer

Varumärke: Louis Tellier
Kategori: Inte kategoriserad
Modell: 208040

Behöver du hjälp?

Om du behöver hjälp med Louis Tellier 208040 ställ en fråga nedan och andra användare kommer att svara dig