Magnus VT-400 Bruksanvisning
Läs gratis den bruksanvisning för Magnus VT-400 (7 sidor) i kategorin Stativ. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 6 recensioner. Har du en fråga om Magnus VT-400 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
Owner’s
Manual
Thank you
for choosing
Magnus.
The Magnus VT-400 is a video
tripod that provides easy-to-use
features for your recording needs.
It offers a 2-way fluid pan head,
3-section legs with flip locks, and
a gear-driven center column. Raise
your camera’s height from 22 to
64 inches, and adjust the friction
for the pan, tilt, and height for
precise control. The quick-release
plate makes it easy to detach and
reattach the camera to switch
between handheld and tripod
shooting.
Video Tripod
VT-400
Safety Warnings
• Please read and follow these instructions,
and keep this manual in a safe place.
• Never set up or pull down a tripod while a
camera is mounted.
• Do not move the tripod or adjust the legs
while a camera is mounted.
• Do not exceed the maximum weight
capacity of the tripod.
• Never leave a camera unattended on the
tripod.
• The camera should be securely fastened
to the quick-release mounting plate before
mounting onto the tripod.
• Never mount a camera to the tripod until all
tripod legs are locked and stabilized.
• Do not lift or move the tripod by the head.
• Keep hands clear of the inside of the legs to
avoid trapping fingers.
• The safe operation of the tripod is the
responsibility of the user.
Video Tripod Components
Tilt/Pan Bar
Center Column
Tension Adjustment
Locking
Mid-Level
Spreader
Quick-Release
Mounting Plate
Leg
Flip-Lock
Pan Locking
Knob
Tilt Locking Knob
Universal ¼-20
Mounting Screw
Center Column
Hand Crank
Float Level
Mounting Plate
Capture Release
All images are for illustrative purposes only.
This Magnus product is warranted to the original purchaser to be free from defects in materials and workmanship under normal
consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever
occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and
in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product
has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty
provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Magnus Customer Service Department to obtain a return
merchandise authorization (“RMA”) number, and return the defective product to Magnus along with the RMA
number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.magnustripods.com or call Customer Service at 212-594-2353.
Magnus is a registered trademark of the Gradus Group. © 2024 Gradus Group LLC. All rights reserved
Product warranty provided by the Gradus Group. www.gradusgroup.Com
GG3
ONE-YEAR LIMITED WARRANTY
Tilt Tension
Adjustment
Pan Tension
Adjustment
Specifications
Load Capacity: 15 lb. (6.8 kg)
Height Range: 22" to 64" (55.8 to 162.5 cm)
Folded Length: 27.2" (69 cm)
Weight: 5.95 lb. (2.7 kg)
Using The Tripod
4
Extend the Legs
Always extend the legs from the top flip-locks
first. Pull each flip-lock and extend the leg to its
desired height. Match the length of the legs
and relock the flip-locks. Check the float level to
verify the tripod is level.
10
Tilt
Release the tilt lock knob. Using the tilt/pan bar,
tilt the tripod head up or down.
9
Pan
Release the pan lock knob. Using the tilt/pan
bar, rotate the tripod head left or right to pan.
Tilt Lock
Pan Lock
8
Mount the Camera to the Tripod
Make certain that your tripod legs are locked
and the tripod is stable and ready for mounting
your camera. From the right side of the tripod,
slide the mounting plate down and left onto
the tripod head. Push down until the mounting
plate locks into place. Push the mounting plate
lock back into place to finish mounting the
camera to the tripod.
7
Mount the Camera to the Plate
Attach the mounting plate to your camera.
Be certain that the retractable alignment pin
sets into its pocket on the camera. Screw the
threaded stud on the plate into the bottom of
the camera. Make sure the thumb screw is flush
against the bottom of the plate.
5
Raise the Center Column
If you need to raise the center column, unlock
the center column by rotating the locking knob
counterclockwise. Use the hand crank to raise
or lower the head platform. Never raise or lower
the head by pushing or pulling it.
6
Adjusting the Center Column Tension
You can adjust the center column tension
to accommodate heavier cameras so that
the column doesn’t slip down from the
weight. Loosen the center column and
mid-level spreader locking knobs. Rotate
the center column clockwise to loosen and
counterclockwise to tighten.
3
Lock the Mid-Level Spreader
Lock the mid-level spreader by rotating the
locking knob clockwise.
2
Spread the Tripod
Spread the tripod legs to the desired width.
Check the float level to verify that the tripod is
level. Readjust the legs if necessary.
Float
Level
Center Column
Lock Knob
1
Unlock the Mid-Level Spreader
Unlock the mid-level spreader by rotating the
locking knob counterclockwise.
There are individual tension adjustment knobs for the pan and tilt features. To adjust, rotate the knob
clockwise to increase tension, and counterclockwise to decrease tension.
Produktspecifikationer
| Varumärke: | Magnus |
| Kategori: | Stativ |
| Modell: | VT-400 |
Behöver du hjälp?
Om du behöver hjälp med Magnus VT-400 ställ en fråga nedan och andra användare kommer att svara dig
Stativ Magnus Manualer
20 December 2024
11 December 2024
11 December 2024
23 September 2024
23 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
Stativ Manualer
- Kodak
- Axler
- Block & Block
- Proaim
- On Air
- Mantona
- Kessler
- Olloclip
- Livoo
- Kogan
- Sirui
- Slidekamera
- Square Jellyfish
- Cam Caddie
- Hohem
Nyaste Stativ Manualer
4 April 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
3 April 2025
2 April 2025
2 April 2025
2 April 2025