Makita DTC104 Bruksanvisning
Läs gratis den bruksanvisning för Makita DTC104 (148 sidor) i kategorin Sax. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 1.5 recensioner. Har du en fråga om Makita DTC104 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/148
DTC104
DTC104
EN
Cordless Cable Cutter INSTRUCTION MANUAL
2
FR
Coupe câble sans l MODE D’EMPLOI
12
DE
Akku-Kabelschneider BETRIEBSANLEITUNG
22
IT
Tagliacavi a cricchetto a batteria ISTRUZIONI PER L’USO
32
NL
Snoerloze kabelschaar GEBRUIKSAANWIJZING
43
ES
Cortadora de Cable Inalámbrica
MANUAL DE INSTRUCCIONES
53
DA
Batteridreven kabelsaks INSTRUKTIONSVEJLEDNING
64
SV
Batteridriven kabelklippare BRUKSANVISNING
74
NO
Batteridrevet kabelkutter INSTRUKSJONSHÅNDBOK
84
FI
Akkukaapelileikkuri KÄYTTÖOPAS
94
LV
Akumulatora kabeļu knaibles LIETOŠANAS INSTRUKCIJA
104
LT
Akumuliatorinės kabelio kirpimo žirklės NAUDOTOJO VADOVAS
114
ET
Aku kaablilõikur KASUTUSJUHEND
124
ZHTW
充電式電纜剪
使用手冊
134
Read before use.
À lire avant utilisation.
Vor Gebrauch lesen.
Leggere prima
dell’uso.
Lezen voor gebruik.
Leer antes de usar.
Læs inden brug.
Läs före användning.
Må leses før bruk.
Lue ennen käyttöä.
Izlasīt pirms lietošanas.
Prieš naudodami
perskaitykite.
Lugege enne
kasutamist.
使用前請詳讀。
2
ENGLISH
ENGLISH: Original instructions
WARNING: Please read and understand all of the instructions and safety information in this operator’s
guide and instructions. Use for unintended applications may lead to serious injury or death.
• Thank you for purchasing our cordless cable cutter.
• Please read this instruction manual thoroughly and carefully before attempting to use the
equipment. After reading this instruction manual, store it in an easily accessible location.
Safety precautions
Be sure to observe the following
The following are the items that you should observe to
prevent people from being harmed and property from
being damaged.
WARNING: The user may be killed or seriously
injured if this product is misused.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
Unmodied plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch
is in the o-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on
the switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached
to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Sax |
| Modell: | DTC104 |
Behöver du hjälp?
Om du behöver hjälp med Makita DTC104 ställ en fråga nedan och andra användare kommer att svara dig
Sax Makita Manualer
24 Augusti 2025
7 Oktober 2024
23 September 2024
12 September 2024
4 September 2024
31 Augusti 2024
27 Augusti 2024
24 Augusti 2024
22 Augusti 2024
20 Augusti 2024
Sax Manualer
- Craftsman
- Bosch
- DeWalt
- Trotec
- Milwaukee
- Hitachi
- Black And Decker
- Parkside
- Daewoo
- Hikoki
- Rowenta
- Silverline
- Gude
- Cecotec
- Ryobi
Nyaste Sax Manualer
4 Augusti 2025
4 Augusti 2025
9 Juli 2025
1 Juli 2025
29 Juni 2025
10 Januari 2025
3 Oktober 2024
26 September 2024
17 September 2024
15 September 2024