Megger DCM320 Bruksanvisning
Megger
Multimeter
DCM320
Läs gratis den bruksanvisning för Megger DCM320 (12 sidor) i kategorin Multimeter. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 2 recensioner. Har du en fråga om Megger DCM320 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
DCM320
Clampmeter
User Guide
www.megger.com
DCM320
2
Safety Information
1. Safety Information
To ensure safe operation and service of the Meter, follow these instructions.
Failure to observe warnings can result in severe injury or death.
Avoid working alone so assistance can be rendered.
To enhance safety, test leads should be disconnected from instrument when not in use.
Do not use test leads or the Clamp Meter if they look damaged.
Do not use the Meter if the Clamp Meter is not operating properly or if it is wet.
Use the Clamp Meter only as specified in the Instruction card or the protection provided
by the Clamp Meter might be impaired.
Special precautions are necessary when operating in situations where exposed live parts
at dangerous voltages may be encountered. Personal protective equipment (not supplied
with this instrument) should be used.
To avoid false readings that could lead to electric shock and injury, replace the battery as
soon as the low battery indicator (
) appears.
1.1 Maintenance
Do not attempt to repair this Clamp Meter.
It contains no user-serviceable parts. Repair or serving should only be performed by qualified
personal.
1.2 Cleaning
Periodically wipe the case with a dry cloth and detergent do not use abrasives or solvents.
www.megger.com DCM320
3
Safety Information
1.3 Safety, Hazard and Warning symbols on the instrument
This paragraph details the various safety and hazard icons on the instrument’s outer case.
Icon Description
F
Warning: High Voltage, risk of electric shock
G
Caution: Refer to user guide.
UK conformity. This equipment complies with current UK legislation
c
EU conformity. Equipment complies with current EU directives.
Equipment complies with current ‘C tick’ requirements.
Do not dispose of in the normal waste stream.
t
Equipment protected throughout by double insulation.
g
Reference earth connection. Not a protective earth terminal
Battery
Application around and removal from hazardous live conductors is permitted
CAT IV - Measurement category IV: Equipment connected between the origin of the low-
voltage mains supply and distribution panel.
CAT III -Measurement category III: Equipment connected between the distribution panel and
electrical outlets.
CAT II - Measurement category II: Equipment connected between the electrical outlets and
user’s equipment.
CAT I - Measurement category I: The circuits are not connected to mains.
Measurement equipment may be safely connected to circuits at the marked rating or lower.
The connection rating is that of the lowest rated component in the measurement circuit.
Produktspecifikationer
| Varumärke: | Megger |
| Kategori: | Multimeter |
| Modell: | DCM320 |
Behöver du hjälp?
Om du behöver hjälp med Megger DCM320 ställ en fråga nedan och andra användare kommer att svara dig
Multimeter Megger Manualer
2 Augusti 2025
2 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
31 Juli 2025
Multimeter Manualer
- Bearware
- Appa
- Somogyi
- Keithley
- Aim TTi
- Elma
- Sanwa
- Perel
- HT Instruments
- Fluke
- Silverline
- Maxwell
- Plieger
- Wago
- Yato
Nyaste Multimeter Manualer
31 Juli 2025
31 Juli 2025
31 Juli 2025
29 Juli 2025
27 Juli 2025
24 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025