Megger TPT420 Bruksanvisning
Läs gratis den bruksanvisning för Megger TPT420 (100 sidor) i kategorin mätning. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 7 recensioner. Har du en fråga om Megger TPT420 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/100
TPT420
Two pole
voltage tester
User guide
Mode d’emploi
Bedienungsanleitung
Guía de usuario
Handleiding
Guida per l’utente
Podręcznik użytkownika
Kullanım kılavuzu
2
References marked on
tester or in instruction
manual
G Warning of a potential danger, comply with
instruction manual.
F Caution! Dangerous voltage. Danger of
electrical shock.
Continuous double or reinforced insulation
complies with category II DIN EN 61140.
Equipment for working under live voltage
G
Safety Warnings
G
Before commencing any testing, short the
prods together to check the batteries.
F The TPT420 is designed to offer a high degree
of safety. It conforms to standards DIN VDE
0682-401 and IEC/EN 61243-3. To ensure
that the unit is operated safely, please read
the following instructions before using the
device.
■ Do not use the instrument in a humid
environment.
■ Before testing a live circuit the voltage
tester should be checked by connecting
to a known voltage source (e.g. a suitable
120 / 230 V outlet or a suitable proving unit)
before and after use.
■ Tests for voltage should be made with both
poles.
■ Extreme care must be taken when testing
voltages above 50 V AC / 120 V DC.
■ Ensure the tester is only used within the
stated measurement ranges, in low voltage
installations up to 1000 V AC and 1500 V DC
and in the measuring category it has been
designed for.
■ When testing, ensure hands are behind the
barriers on the main body and remote probe.
Avoid touching the tips.
■ The instrument must be in good working
order and be clean and dry, with no broken
or damage to the leads, probes or case.
■ Do not use the unit with the battery cap
removed and ensure when changing the
batteries no probe is connected to any
circuits.
■ Do not use the instrument if one or more
functions are not working correctly.
■ When testing, the warning triangle “
F“
LED will illuminate, even in the event of the
Produktspecifikationer
| Varumärke: | Megger |
| Kategori: | mätning |
| Modell: | TPT420 |
Behöver du hjälp?
Om du behöver hjälp med Megger TPT420 ställ en fråga nedan och andra användare kommer att svara dig
mätning Megger Manualer
9 Augusti 2025
3 Augusti 2025
3 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
2 Augusti 2025
mätning Manualer
- Milwaukee
- EBERLE
- ABB
- Basetech
- Tektronix
- GW Instek
- Klein Tools
- Chauvin Arnoux
- Sauermann
- Laserliner
- Flir
- National Geographic
- Gossen Metrawatt
- Circutor
- Bresser
Nyaste mätning Manualer
12 September 2025
12 September 2025
11 September 2025
11 September 2025
10 September 2025
10 September 2025
10 September 2025
10 September 2025
9 September 2025
8 September 2025