Metra 95-7393B Bruksanvisning
Metra
Inte kategoriserad
95-7393B
Läs gratis den bruksanvisning för Metra 95-7393B (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 4.5 recensioner. Har du en fråga om Metra 95-7393B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 11/19/18 INST95-7393B
I N S TA L L AT I O N I N S T R U C T I O N S
95-7393B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets
A B
Hyundai Accent 2018 up*
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
*Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring harness: Please visit metraonline.com
for wiring harness options
Antenna adapter: 40-KI11
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY KIT PREPARATION
1. Unclip and remove the a/c vent trim
panel surrounding the radio. (Figure A)
2. Remove (4) Phillips screws securing the
radio. Slide the radio out, then unplug
and remove the radio. (Figure B)
Continue to Kit Preparation
(Figure B) (Figure B)
(Figure A) (Figure A)
From the factory a/c vent trim panel:
1. Unclip and remove the a/c vents.
2. Remove just (4) panel clips. (Figure A)
To the 95-7393B radio trim panel:
1. Clip in the factory a/c vents. (Figure B)
2. Attach the factory (4) panel clips.
(Figure B)
Continue to Kit Assembly
REV. 11/19/2018 INST95-7393B 3
KIT ASSEMBLY
(Figure A)
1. Secure the
radio brackets
to the radio
using the screws supplied with the radio.
(Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
3. Secure the radio assembly to the dash
using the factory screws.
4. Reassemble the dash in reverse order of
disassembly using the 95-7393B
radio
trim panel
to complete the installation.
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Inte kategoriserad |
| Modell: | 95-7393B |
Behöver du hjälp?
Om du behöver hjälp med Metra 95-7393B ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Metra Manualer
3 April 2025
3 April 2025
3 April 2025
12 Mars 2025
24 Februari 2025
24 Februari 2025
14 Januari 2025
14 Januari 2025
2 Januari 2025
2 Januari 2025
Inte kategoriserad Manualer
- Challenge Xtreme
- Advance Acoustic
- Noise Engineering
- Vantrue
- King Canopy
- Sungrow
- DayStar Filters
- Emeril Lagasse
- The Grainfather
- EKO
- Tektronix
- Magic Chef
- Saro
- Petmate
- Zenza Bronica
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025