Metra 95-7617GHG Bruksanvisning
Metra
Inte kategoriserad
95-7617GHG
Läs gratis den bruksanvisning för Metra 95-7617GHG (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 6.5 recensioner. Har du en fråga om Metra 95-7617GHG eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
INSTALLATION INSTRUCTIONS FOR PART 95-7617GHG
APPLICATIONS
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
REV. 4/3/2013 INST95-7617GHG
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Table of Contents
• Double DIN radio provision
• Painted Grey High Gloss
• A) Radio Trim Panel • B) Radio Brackets
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7552 2010-Up Nissan Wire Harness • 70-7554 2010-Up Nissan Wire Harness
Antenna Adapter: • 40-NI12 2010-Up Nissan Antenna Adapter
• Panel removal tool • Phillips screwdriver • Socket Wrench
TOOLS REQUIRED
(Sedan)
A B
Dash Disassembly
– Nissan Altima 2013-up ......................................... 2
Kit Assembly
– Double DIN radio provision .................................... 3
99-7617GHG
Dash Disassembly
1. Unclip the right side of the driver’s
knee bolster panel next to the
center console and let hang. Note:
There is no need to completely
remove the panel. (Figure A)
2. Unclip and remove the (2) silver
side trim panels from each side of
the factory radio. (Figure B)
3. Unclip and remove trim panel
below the a/c control panel.
(Figure A)
(Figure D)
(Figure B)
(Figure E)
(Figure C)
(Figure F)
4. Remove (4) Phillips screws
securing the factory radio, a/c
control and a/c vents. (Figure C)
5. Remove the a/c controls.
(Figure D)
6. Remove the a/c vent panel.
(Figure E)
7. Remove the factory radio.
(Figure F)
8. If equipped there may be an a/c
amp present attached under the
radio remove (2) Phillips screws
securing the a/c amp.
Continue to kit assembly
99-7617GHG
Kit Assembly
Double DIN radio provision
1. If equipped attach the a/c amp to
the radio brackets with the factory
hardware. (Figure A)
2. Mount the DDIN radio to the radio
brackets using the screws supplied
with the radio. (Figure A)
3. Mount the radio/bracket assembly
into the dash.
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
5. Reassemble dash in reverse order
of disassembly.
(Figure A)
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Inte kategoriserad |
| Modell: | 95-7617GHG |
Behöver du hjälp?
Om du behöver hjälp med Metra 95-7617GHG ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Metra Manualer
3 April 2025
3 April 2025
3 April 2025
12 Mars 2025
24 Februari 2025
24 Februari 2025
14 Januari 2025
14 Januari 2025
2 Januari 2025
2 Januari 2025
Inte kategoriserad Manualer
- Verbatim
- Talkaphone
- Senco
- AvMap
- Megasat
- Solac
- N8WERK
- RDL
- Nordea
- Switel
- Batronix
- Gretsch
- Ziggo
- Indesit
- Davita
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025