Metra 99-7522B Bruksanvisning
Metra
Inte kategoriserad
99-7522B
Läs gratis den bruksanvisning för Metra 99-7522B (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 6.5 recensioner. Har du en fråga om Metra 99-7522B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.®MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 9/6/17 INST99-7522B
I N S TA L L AT I O N I N S T R U C T I O N S
99-7522B
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted matte black to match factory finish
KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) Pocket • D) (4) Panel clips • E) (4) #8 x 3/8” Phillips pan head screws
• F) (4) #8 x 3/8” Phillips truss head screws TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
– . ISO DIN radio provision with pocket ................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7903 • AX-LCD (Mazda6 only)
Antenna Adapter: 40-HD10
A B C D E F
Mazda CX5 2013-2015 2016, CX5 Sport ,
Mazda6 2014-2015
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unsnap and remove the trim panel above the glove box
and climate controls. This panel will include the climate
vents and hazard button. (Figure A)
Note:
Do not cycle the key while the hazard button is
disconnected.
2. Unsnap and remove the trim from around the factory
radio. (Figure B)
3. Remove (2) Phillips screws, and (1) 10mm bolt securing
the factory radio, then unplug and remove.
Continue to Kit Assembly (Figure A)
(
Figure
B)
REV. 9/6/2017 INST99-7522B 3
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Install the (4) included
panel clips
to the back of the
radio
housing
.
Note:
The factory clips removed in disassembly can also
be used if so desired.
2. Mount the
pocket
to the
radio brackets
with (4) #8 x 3/8”
Phillips pan head screws supplied. (Figure A)
3. Attach the completed assembly to the
radio housing
with
(4) #8 x 3/8” Phillips truss head screws supplied.
(Figure B)
4. Remove the metal “DIN” sleeve and trim ring from the
aftermarket radio.
5. Slide the radio into the completed assembly and secure
with screws supplied with the radio. (Figure C)
6. Locate the factory wiring harness and antenna connector
in the dash and complete all necessary connections to
the radio. Metra recommends using the proper mating
adapter from Metra and/or AXXESS. Test the radio for
proper operation.
7. Reassemble the dash in reverse order of disassembly.
(Figure A)
(Figure B)
(Figure C)
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Inte kategoriserad |
| Modell: | 99-7522B |
Behöver du hjälp?
Om du behöver hjälp med Metra 99-7522B ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Metra Manualer
3 April 2025
3 April 2025
3 April 2025
12 Mars 2025
24 Februari 2025
24 Februari 2025
14 Januari 2025
14 Januari 2025
2 Januari 2025
2 Januari 2025
Inte kategoriserad Manualer
- Vicoustic
- ICC
- Laine
- Rohl
- OKAY
- Gemini
- Lasita Maja
- Pelgrim
- FSR
- Essenza
- Char-Broil
- Turmix
- Mac Tools
- Coors Light
- Vistus
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025