Metra 99-3528 Bruksanvisning

Metra Inte kategoriserad 99-3528

Läs gratis den bruksanvisning för Metra 99-3528 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 4.5 recensioner. Har du en fråga om Metra 99-3528 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/4

REV. 7/30/2015 INST99-3528

Installation instructions for part 99-3528

CAUTION!

Metra recommends disconnecting the negative bat

tery terminal before beginning any installation, unless the vehicle

manufacturer recommends against so. Please check with your local

Dealership for more information. All accessories, switches, climate

controls panels, and especially air bag indicator lights must be con-

nected before reconnecting the battery or cycling the ignition. Also,

do not remove the factory radio with the key in the on position, or the

vehicle running. It would be best to remove the key from the ignition

and then wait a few seconds before removing the factory radio.

• DIN radio provision with pocket

• A) Radio Housing

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-1784

Antenna Adapter: • 40-VW10

• 86-3528 Radio Removal Keys • Panel Removal Tool • Phillips Screwdriver

TOOLS REQUIRED

Pontiac GTO 2004-2006

99-3528

Dash Disassembly ................................................. 2

Kit Assembly

– DIN radio provision with pocket ............................ 3

Table of Contents

99-3528

Using the radio removal keys, pull

the factory radio from the dash and

disconnect the wiring. (Figure A)

2. Unsnap and remove the trim panel

at the top center of the dash above

the A/C vents and remove (4)

Phillips screws. (Figure B)

Remove (1) Phillips screw from inside

lower open storage area where center

console and dash meet. (Figure C)

4. Unsnap and remove center console

(open center armrest/ storage

compartment and work forward).

(Figure D)

Dash Disassembly

5. Remove (2) Phillips screws

exposed at the bottom of the

center panel surrounding radio and

remove panel. (Figure E)

6. Unclip and remove trim panel

surrounding radio and A/C controls.

7. Remove (3) Phillips screws holding

“cage” in radio opening. (Figure F)

8. Pull down on the “cage” from the

opening inside on the top and

remove. (Figure G)

Continue to kit assembly

(Figure B) (Figure E)

(Figure C) (Figure F)

(Figure D) (Figure G)(Figure A)

99-3528

Kit Assembly

(Figure A)

(Figure B)

DIN radio provision with pocket

1. Remove the metal DIN sleeve from

the aftermarket radio.

2. Slide the sleeve into the Radio

Housing and secure by bending the

metal locking tabs down. (Figure A)

3. Slide the radio back into the sleeve

until it clicks in. (Figure B)

4. Reassemble the dash in reverse

order of disassembly, leaving the

cage removed in disassembly out.

5. Locate the factory wiring harness

and antenna plug in the dash and

make all necessary connections

to the radio. Metra recommends

using the proper mating adapters

from Metra and/or AXXESS.

Re-connect the negative battery

terminal and test the radio for

proper operation.

6. Snap the completed assembly into

the dash until secure.

Produktspecifikationer

Varumärke:	Metra
Kategori:	Inte kategoriserad
Modell:	99-3528
Enhetsplacering:	Vrijstaand
Typ av operation:	Draaiknop
Färg på produkten:	Wit
Inbyggd display:	Ja
Värmekälla:	Electrisch
Bredd:	600 mm
Djup:	540 mm
Höjd:	850 mm
Nettoskatt:	2800 W
Typ av laddare:	Voorbelading
Torksystem:	Condensatie
Trummaterial:	Zink
Sladdlängd:	1.45 m
Trumminnehåll:	104 l
Startfördröjning:	20 uur
Indikering av återstående tid:	Ja
Cykelns längd:	96 min
Ljudnivå:	66 dB
Energie-efficiëntieklasse:	B
Energie consumptie:	3.92 kWu
Årlig-energiförbrukning:	504 kWu
Maximal centrifugeringshastighet:	- RPM
Djup med stängd dörr:	600 mm
Nominell kapacitet:	7 kg
AC-ingångsspänning:	230 V
AC-ingångsfrekvens:	50 Hz
Type beeldscherm:	LED