Metra 99-7379HG Bruksanvisning
Metra
Inte kategoriserad
99-7379HG
Läs gratis den bruksanvisning för Metra 99-7379HG (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 10 recensioner. Har du en fråga om Metra 99-7379HG eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
The World’s best kits.MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV.6/13/17 INST99-7379HG
I N S TA L L A T I O N I N S T R U C T I O N S
99-7379HG
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted gloss black to match the factory finish
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips screws
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7304
• Visit metraonline.com for premium options
Antenna Adapter: Not required
A B C D
Hyundai Elantra GT (with factory navigation) 2013-2015
1.800.221.0932
|
MetraOnline.com
DASH DISASSEMBLY
2
1. Unsnap and remove the vent panels
from either side of the radio down to the
shifter base. (Figure A)
2. Remove the (4) screws and remove the
radio. (Figure B)
Continue to Kit Assembly
(Figure A)
(Figure B)
REV. 6/13/2017 INST99-7379HG 3
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Attach the
radio brackets
to the
radio
housing trim panel
with (4) #8 x 3/8”
Phillips screws supplied (Figure A)
2. Mount the
pocket
to the bracket/panel
assembly with (4) #8 x 3/8” Phillips screws
supplied. (Figure B)
3. Remove the metal DIN sleeve and trim ring
from the aftermarket radio.
4. Slide the radio into the assembly and
secure with screws supplied with the radio.
(Figure C)
5. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or AXXESS.
Test the radio for proper operation.
6. Mount the new radio assembly into the
dash and reassemble the dash in reverse
order of disassembly.
ISO DDIN radio provision
1. Attach the
radio brackets
to the
radio
housing trim panel
with (4) #8 x 3/8”
Phillips screws supplied (Figure A)
2. Slide the radio into the assembly and
secure with screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or AXXESS.
Test the radio for proper operation.
4. Mount the new radio assembly into the
dash and reassemble the dash in reverse
order of disassembly.
(Figure A) (Figure A)
(Figure B) (Figure B)
(Figure C)
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Inte kategoriserad |
| Modell: | 99-7379HG |
Behöver du hjälp?
Om du behöver hjälp med Metra 99-7379HG ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Metra Manualer
3 April 2025
3 April 2025
3 April 2025
12 Mars 2025
24 Februari 2025
24 Februari 2025
14 Januari 2025
14 Januari 2025
2 Januari 2025
2 Januari 2025
Inte kategoriserad Manualer
- Atosa
- Turbo Air
- Acer
- Exagerate
- Catlink
- StarIink
- OSO
- Autoscript
- Focal
- NeoMounts
- Vileda
- Deditec
- Pioneer
- Befaco
- ProLights
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025