Metra 99-7802CH Bruksanvisning
Läs gratis den bruksanvisning för Metra 99-7802CH (8 sidor) i kategorin Bilsats. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 5.5 recensioner. Har du en fråga om Metra 99-7802CH eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
METRA - The World’s best kits ®metraonline.com
REV. 11/20/2017 INST99-7802CH
Installation instructions for part 99-7802CH
®
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
U.S. PATENT # D723,537
• ISO DIN radio provision with pocket
• Painted Charcoal
• A) Radio housing • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1729
Antenna Adapter: • 40-HD11
Steering wheel control interface: • ASWC-1
• Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
Dash Disassembly ................................................. 2
Kit Preparation ....................................................... 3
Kit Assembly
– ISO DIN radio provision with pocket 3 ......................
Table of Contents
AB C D
99-7802CH
®
1. Unclip and remove the a/c vents
from either side of the factory
radio. (Figure A)
2. Remove (4) Phillips screws
securing the radio. (Figure B)
3. Remove (2) Phillips screws
securing the factory hazard button
to the factory radio trim panel.
(Figure C)
4. Remove the (6) panel clips from
the factory radio trim panel and
save for Kit Assembly.
Continue to Kit Preparation
Dash Disassembly
(Figure A) (Figure B)
(Figure C)
99-7802CH
®
Kit AssemblyKit Preparation
ISO DIN radio provision with pocket
1. Secure the to the pocket radio
brackets with the (4) #8 x 3/8”
Phillips screws supplied.
(Figure A)
2.
Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio between the radio
brackets and secure using the
screws supplied with the radio.
(Figure B)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. Secure the radio into the dash and
reassemble the dash in reverse
order of disassembly.
To the radio housing:
1. Attach the (6) factory panel clips.
(Figure A)
2.
Attach the factory hazard button
using the factory screws. (Figure B)
Continue to Kit Assembly
(Figure A)
(Figure B)
(Figure A)
(Figure B)
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Bilsats |
| Modell: | 99-7802CH |
Behöver du hjälp?
Om du behöver hjälp med Metra 99-7802CH ställ en fråga nedan och andra användare kommer att svara dig
Bilsats Metra Manualer
3 April 2025
3 April 2025
3 April 2025
3 April 2025
1 April 2025
29 December 2024
29 December 2024
29 December 2024
29 December 2024
29 December 2024
Bilsats Manualer
- PAC
- Scosche
- T'nB
- MT Logic
- Magellan
- Lenco
- THB
- HTC
- TomTom
- Interphone-Cellularline
- Iluv
- Alpin
- Parrot
- Sony Ericsson
- Plantronics
Nyaste Bilsats Manualer
2 April 2025
16 Februari 2025
16 Februari 2025
16 Februari 2025
31 December 2025
29 December 2024
16 December 2024
19 Oktober 2024
6 Oktober 2024
2 Oktober 2024