Metra 99-9103 Bruksanvisning
Metra
Inte kategoriserad
99-9103
Läs gratis den bruksanvisning för Metra 99-9103 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 8 recensioner. Har du en fråga om Metra 99-9103 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
METRA. The World’s best kits.™© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
REV. 9/11/2015 INST99-9103
Installation instructions for part 99-9103
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
metraonline.com
• DIN radio provision
A) Radio housing
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-9004-NAV (A3) • 70-1787 (A4 & S4)
Antenna Adapter: • 40-VW54
• 86-9001 radio removal keys • Panel removal tool
TOOLS REQUIRED
Audi A3 2006-2007(with Concert radio)
A4 & S4 (with Concert radio) 2000-2005
99-9103
A
Dash Disassembly ..................................................2
Kit Assembly
– DIN radio provision ............................................... 3
Table of Contents
99-9103
2
1. Insert Metra’s 86-9001 into the
slots in the factory radio and pull
the radio out. (Figure A)
2. Disconnect the wiring.
Dash Disassembly
(Figure A)
99-9103
Kit Assembly
DIN radio provision
1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Place the Radio Housing into the
radio opening in the dash.
3. Slide the sleeve into the radio
opening through the Radio
Housing, and secure by bending
the metal locking tabs outwards.
Make sure the locking tabs
catch both the edge of the Radio
Housing, and the dash.
4. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
5. Slide the radio back into the sleeve
until it clicks in.
3
Produktspecifikationer
| Varumärke: | Metra |
| Kategori: | Inte kategoriserad |
| Modell: | 99-9103 |
Behöver du hjälp?
Om du behöver hjälp med Metra 99-9103 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Metra Manualer
3 April 2025
3 April 2025
3 April 2025
12 Mars 2025
24 Februari 2025
24 Februari 2025
14 Januari 2025
14 Januari 2025
2 Januari 2025
2 Januari 2025
Inte kategoriserad Manualer
- Schmidt & Bender
- Pointer
- IKRA
- Jamo
- Domo
- Clearblue
- Reishunger
- Panduit
- Naxa
- Aligator
- Erica Synths
- Little Giant
- SetonixSynth
- Pro-Ject
- Nofred
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025