Microchip CW01DB1 Bruksanvisning


Sidor 2 Engels Inte kategoriserad

Läs bruksanvisningen för Microchip CW01DB1 gratis online eller ladda ner PDF:en. 22 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga

Supertex inc.
Supertex inc.
www.supertex.com
CW01DB1
Doc.# DSDB-CW01DB1
A062014
General Description
The CW01 has 6 logic inputs; OE, CLK, DIN1, DIN2, DIN3,
and DIN4. Every logic input has a 10kΩ pull down resistor.
There are 3 power input voltages: VLL, VDD and VDX. VLL is the
input logic level, typically 2.5V. VDDis the level translator,
typically 5.0V. VDX is the gate drive voltage, andis at the
same voltage level as VDD. High peak currents will be
drawn from VDX during switching. Each supply has a series
ferrite bead and a 0.1µF ceramic chip capacitor to keep the
supply clean from high frequency noise.
There are 4 outputs: HV1, HV2, HV3 and HV4. These are
the connections to the drains of 100V, 7.0Ω, N-channel
MOSFETs.
4-Channel, Low Phase Noise,
Low Power, Continuous Wave Transmitter
Board Layout
Actual Size: 41.0mm x 31.0mm
Parameter Value
VLL 0V to +5.5V
VDD 0V to +5.5V
VDX 0V to +5.5V
Specications

Betygsätt denna manual


Produktspecifikationer

Varumärke: Microchip
Kategori: Inte kategoriserad
Modell: CW01DB1

Behöver du hjälp?

Om du behöver hjälp med Microchip CW01DB1 ställ en fråga nedan och andra användare kommer att svara dig