Microchip MD1715 Bruksanvisning


Läs gratis den bruksanvisning för Microchip MD1715 (18 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 5.5 recensioner. Har du en fråga om Microchip MD1715 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/18
2018 Microchip Technology Inc. DS20005921A-page 1
MD1715
Features
Advanced CMOS Technology
±4.75 to 12.9V Gate Drive Voltage
2A Output Source and Sink Current
6.5 ns Rise and Fall Time with 1 nF Load
10 ns Propagation Delay
±2 ns Matched Delay Times
12 Matched Channels
1.8V to 3.3V CMOS Logic Interface
Smart Logic Threshold
Low-inductance Package
Applications
Medical Ultrasound Imaging
Piezoelectric Transducer Drivers
Metal Flaw Detection
Non-destructive Testing (NDT)
General Description
The MD1715, paired with Microchip’s TC8020, forms a
2-channel five-level high-voltage high-speed transmit
pulser chip set. The chip set is designed for medical
ultrasound imaging applications but can also be used
for metal flaw detection, NDT and piezoelectric
transducer drivers.
The MD1715 is a 2-channel logic controller circuit with
12 low-impedance MOSFET gate drivers. There are
two sets of control logic inputs—one for Channel A and
one for Channel B. Each channel consists of three pairs
of MOSFET gate drivers. These drivers are designed to
match the drive requirements of Microchip’s TC8020.
The TC8020 is the output stage of the pulser, with six
pairs of MOSFETs. Each pair consists of a P-channel
and an N-channel MOSFET. They are designed to
have the same impedance and can provide typical
peak currents of ±3.5A at 200V.
Package Type
See Table 2-1 for pin information.
40-lead QFN
(Top view)
1
40
2-Channel 5-Level High-Speed Ultrasound Driver IC


Produktspecifikationer

Varumärke: Microchip
Kategori: Inte kategoriserad
Modell: MD1715

Behöver du hjälp?

Om du behöver hjälp med Microchip MD1715 ställ en fråga nedan och andra användare kommer att svara dig