Microchip PL485-EK Bruksanvisning
Sidor 41 Engels Inte kategoriserad
Läs bruksanvisningen för Microchip PL485-EK gratis online eller ladda ner PDF:en. 19 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
PL485-EK
PL485-EK User Guide
Introduction
PL485-EK is an evaluation kit for the PL485. PL485 is a programmable System On Chip (SOC) for narrow-band
Power Line Communication (PLC) from Microchip Technology Inc, able to run any PLC protocol in the frequency
band below 500 kHz. Depending on the running firmware, PL485 is able to support applications not only for basic
connectivity (point to point or point to multi-point connectivity) but also for complex mesh network topologies.
The PL485-EK board has been conceived to communicate in the CENELEC B-Band (95 kHz to 125 kHz) and
complies with the CENELEC EN 50065 standard. It is designed to be directly connected to low voltage DC power
rails and optionally to AC mains by means of an external coupler accessory. Please refer to PLC-AC-Coupler User
Guide for more information about the AC coupler accessory.
Contents
•Welcome letter
• Board:
–One PL485-EK board
• Cable:
–One Micro A/B-type USB cable
Kit contents are protected with anti-static foam. The PL485-EK board is shipped in an anti-static shielding bag.
WARNING
The board must not be subject to high electrostatic discharges. It is recommended to use a grounding
strap or similar ESD protective device when handling the board in hostile ESD environments. Avoid
touching the component pins or any other metallic element on the board.
Features
•PL485-EK board includes a PL485 system on chip, able to run any PLC protocol in the <500 kHz band.
•PL485-EK board implements a coupling circuit optimized for the band 95kHz to 125 kHz, compliant with
CENELEC standard EN50065.
•SWD/JTAG interface for MCU debugging and programming purposes. PL485-EK board includes as well a USB
Embedded Debugger (EDBG) for on-board debugging.
•USB 2.0 full-speed interface
• mikroBUS™ socket connector to interface with other circuits and add-on boards.
•Xplained PRO header connector (master) to interface with other circuits and add-on boards.
•RESET push button, ERASE jumper.
•Voltage monitor circuit on the 5V rail, or alternatively on the 3.3V rail with minor modifications.
•PL485-EK board can be powered from the following sources:
–Micro-B USB connector (J5)
–Micro-B USB connector (J12)
© 2020 Microchip Technology Inc. User GuideDS50002954B-page 1
Produktspecifikationer
| Varumärke: | Microchip |
| Kategori: | Inte kategoriserad |
| Modell: | PL485-EK |
Behöver du hjälp?
Om du behöver hjälp med Microchip PL485-EK ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Microchip Manualer
Microchip PIC32CM1216MC00032 Bruksanvisning Microchip ATSAM4LS4C Bruksanvisning Microchip PIC32MZ2048EFG100 Bruksanvisning Microchip MCP1661 Bruksanvisning Microchip AT89LP428 Bruksanvisning Microchip PIC32MX530F128H Bruksanvisning Microchip SY89858U Bruksanvisning Microchip MCP401x/2x Bruksanvisning
Populära i Inte kategoriserad
Microchip SY58022U Bruksanvisning Microchip MCP9902 Bruksanvisning Microchip SY58036U Bruksanvisning