Mikrotik PWR-LINE US Bruksanvisning
Mikrotik
Powerline adapter
PWR-LINE US
Läs gratis den bruksanvisning för Mikrotik PWR-LINE US (4 sidor) i kategorin Powerline adapter. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 14.5 recensioner. Har du en fråga om Mikrotik PWR-LINE US eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
PWR-LINE
The PWR-LINE series devices allow Ethernet like connectivity between supported devices over regular electrical
power lines. When plugged into the same electrical circuit, the PWR devices will establish Ethernet connectivity by
using the HomePlug AV standard.
The PWR-LINE is a smart power adapter with a built-in USB cable.
This particular device is designed for supported MikroTik products with a microUSB port and PWR-LINE support.
Connect this adapter to your electrical outlet and then connect the USB cable to power your supported MikroTik
device. When doing the same with another PWR-LINE compatible device somewhere further in your premises, the
devices will form a connection without needing to install any LAN cables. The device will show up as an additional
Ethernet interface in your routers configuration interface. You can install more PWR-LINE devices to further build
your network.
Connecting
1. Plug one PWR-LINE device into a power socket.
2. Connect the built-in USB cable to the microUSB port of a supported MikroTik router.
3. Plug another PWR-LINE unit (or any other compatible device) somewhere in the same electrical circuit.
Use the sync button to connect the devices and your local network will automatically be extended. See
section Buttons and Jumpers on how to pair additional PWR-LINE devices.
Powering
The device accepts powering directly from 100-230 V ~50/60Hz wall socket it is plugged into. The power
consumption under maximum load can reach 5 W.
Buttons and Jumpers
PWR connection button (sync)
•Hold 0.5 – 3 seconds. For 120 seconds will try to communicate with another PWR-LINE device. A blinking
orange LED light indicates that it is in search mode. You have to also do the same on the other PWR
device, so they can synchronize. Press button again to cancel the search.
•Hold 5 – 8 seconds. A new security key is generated. This is needed to remove a PWR-LINE device from
an existing PWR network.
•Hold 10 – 15 seconds. Resets all PWR related settings.
See for more information. Contact for help. Modified: 11-Feb-19 Document #45868https://mikrotik.com support@mikrotik.com
Produktspecifikationer
| Varumärke: | Mikrotik |
| Kategori: | Powerline adapter |
| Modell: | PWR-LINE US |
Behöver du hjälp?
Om du behöver hjälp med Mikrotik PWR-LINE US ställ en fråga nedan och andra användare kommer att svara dig
Powerline adapter Mikrotik Manualer
20 September 2024
14 September 2024
26 Augusti 2024
Powerline adapter Manualer
- Allnet
- Hamlet
- Trendnet
- GBS Elettronica
- Totolink
- Strong
- Eminent
- LevelOne
- Eero
- ICIDU
- Nedis
- NPG
- TELE System
- Western Digital
- AVM
Nyaste Powerline adapter Manualer
20 Februari 2025
2 Februari 2025
1 Februari 2025
28 Januari 2025
8 Januari 2025
1 Januari 2025
1 Januari 2025
1 Januari 2025
29 December 2024
24 December 2024