Mini-Box picoPSU-80-WI-32 Bruksanvisning
Mini-Box
Dator strömförsörjning
picoPSU-80-WI-32
Läs gratis den bruksanvisning för Mini-Box picoPSU-80-WI-32 (5 sidor) i kategorin Dator strömförsörjning. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 10 recensioner. Har du en fråga om Mini-Box picoPSU-80-WI-32 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
picoPSU-80-WI-32
12-32V, 80watt
ATX Power Supply
Quick Installation Guide
Version 1.0d
P/N picoPSU-80-WI-32
Mini-Box.com ATX DC-DC Converter Series
picoPSU-80-WI-32 Quick Installation Guide Page 2
Introduction
The picoPSU-80-WI-32 is a small yet powerful and fully compliant
ATX power supply designed to power a wide variety of
motherboard from a single 12-32V unregulated power source.
The picoPSU-80-WI-32 is the only “plug-in” wide input range power
supply solution for general purpose low power motherboards.
Compatible with most VIA CPUs M/B and with Atom, Pentium-
M / Core Duo boards picoPSU-80-WI-32, provides cool, 100%
silent power for your system. The PICOPSU-80-WI-32 has many
advantages over a regular power supply:
-Smallest ATX PSU to date
-100% silent operation
-Low heat dissipation with combined eciency over 93%
-Plugs directly into the motherboard’s power connector, no cable
mess
Mini-Box.com ATX DC-DC Converter Series
picoPSU-80-WI-32 Quick Installation Guide Page 3
Quick installation Instructions
The PICOPSU-80-WI-32 has been specically designed for the
Mini-ITX form factor, thus eliminating the need for ATX power
cables. It is also 1U compliant – height will not exceed the 1U
formfactor.
1) After the picoPSU module was ‘snapped in’, hook the
hard drive power or oppy power to your oppy/hard
drives. If more hard drives or oppy connectors are
needed, use a HDD/oppy “Y” splitter cable.
2) Connect a 12-32VDC power adapter (peak should not exceed
34V) to the input connector.
3) Turn on the PC using the motherboard ON/OFF switch
Typical conguration
The picoPSU-80-WI-32 has been tested with all mini-ITX board
under virtually any disk/oppy/CDROM/PCI conguration.
Removing the picoPSU-80-WI-32
In order to remove the picoPSU you must release the power
connector latch and then remove the unit. Gently lift the picoPSU
out from the ATX connector, by grabbing from the picoPSU PCB,
not from components or the wire harness.
Produktspecifikationer
| Varumärke: | Mini-Box |
| Kategori: | Dator strömförsörjning |
| Modell: | picoPSU-80-WI-32 |
Behöver du hjälp?
Om du behöver hjälp med Mini-Box picoPSU-80-WI-32 ställ en fråga nedan och andra användare kommer att svara dig
Dator strömförsörjning Mini-Box Manualer
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
Dator strömförsörjning Manualer
- Mars Gaming
- Planet
- ENDORFY
- Apc
- Antec
- FSP/Fortron
- Ansmann
- Steren
- Pyle
- Allied Telesis
- FSP
- Adj
- Corsair
- Akasa
- Fractal Design
Nyaste Dator strömförsörjning Manualer
9 April 2025
3 April 2025
30 Mars 2025
30 Mars 2025
28 Mars 2025
16 Januari 2025
8 Januari 2025
6 Januari 2025
2 Januari 2025
2 Januari 2025