Nec MultiSync LCD5220 Bruksanvisning

Läs gratis den bruksanvisning för Nec MultiSync LCD5220 (2 sidor) i kategorin Övervaka. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 8 recensioner. Har du en fråga om Nec MultiSync LCD5220 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

1.1) Lay LCDona matasinFig.1(inorder notto damage LCD).

1.2) Remove STAND

(if used) and BEZEL

(Number of screws

that hold the STAND

is 2 pieces.

Number ofscrews

that hold the BEZEL

is 12 pieces.)

3.2) Putprotectiveglass onthe panel.

NOTEAlignedge(refertoFig. 3.4).:

3.3) Reinstall the BRACKET PWB IR and rear cover.

(Number of screws that holdthe rear cover is 3 pieces.)

NOTE:Adjustthe position of BRACKET PWB IR to the

lower hole.

Figure 3.1Figure 3.2

Figure 3.3

Figure 3.5

Figure 3.4

Align edge

60mm

60mm

2.1) Remove thepartof the rearcoverindicatedin figure 2.1and

the BRACKETPWBIR. (Numberofthescrewsthatholdthe

rearcoveris 3 pieces.)

3.1) Paste TAPE-1(DOUBLEsided ADHESIVETAPE)andpeel

thepaperoff. SpecificationofTAPE-1shouldbeequivalent

to"3M VHBtape9473".

NOTE:1. DonotpasteTAPE-1onpanel'sactivearea.

2.Do notpasteTAPE-1 onthearea inFig.3.2.

Figure 1

Figure 2.1

Figure 2.2

Adjustthe positionof BRACKET

PWB IR to the lower hole.

Remove BRACKET PWB IR

rear cover

Remove the three screws

Paste TAPE-1on thisarea

Donotpaste TAPE-1

on this area.This note

referstoall 4corners.

BRACKET PWBIR

INSTALLATION MANUAL

PROTECTIVE GLASS

FOR MULTISYNC

®

LCD4020,

LCD4620 LCD5220AND

NECESSARY COMPONENTS:

- 1 pieceprotectiveglas (supplied)

-brackets(supplied)(40"-11pcs, 46"-13pcs, 52"-12pcs)

-tape,"3M VHB tape9473"orequivalent(notsupplied)

-tape,"Scotchfoam47183,2/12,7mm" orequivalent(notsupplied)

Productused fordemonstration inthismanual: LCD4020

Produktspecifikationer