Nedis BTTR100BK Bruksanvisning
Nedis
Audiostreamer
BTTR100BK
Läs gratis den bruksanvisning för Nedis BTTR100BK (76 sidor) i kategorin Audiostreamer. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om Nedis BTTR100BK eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/76
BTTR100BK
MANUAL (p. 2)
ANLEITUNG (S. 5)
MODE D’EMPLOI (p. 8)
GEBRUIKSAANWIJZING (p. 11)
MANUALE (p. 14)
MANUAL DE USO (p. 17)
MANUAL (p. 20)
HASZNÁLATI ÚTMUTATÓ (o. 23)
KÄYTTÖOHJE (s. 26)
BRUKSANVISNING (s. 29)
NÁVOD K POUŽITÍ (s. 32)
MANUAL DE UTILIZARE (p. 35)
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 38)
BRUGERVEJLEDNING (s. 41)
VEILEDNING (s. 44)
ИНСТРУКЦИЯ (47 стр.)
KILAVUZ (s. 50)
KASUTUSJUHEND (lk. 53)
NÁVOD (s. 56)
ROKASGRĀMATA (lpp. 59)
NAUDOJIMO VADOVAS (62 p.)
PRIRUČNIK (str. 65)
РЪКОВОДСТВО (p. 68)
INSTRUKCJA OBSŁUGI (str. 71)
PRIROČNIK (str. 74)
Audio transmitter with Bluetooth® Wireless Technology for headphones
ENGLISH
2
Product view
Pairing button
USB power connector
Audio input for TV or audio device
Setup
1. Connect the 3.5mm connector to the BTTR100BK.
2. Connect the other 3.5mm connector to the headphone output of a TV or
audio device.
3. Connect the USB connector to the USB port of the TV or audio device (or
connect the USB connector to a USB power adapter)
Operation
Connect the rst set of headphones or music receiver:
1. Take your Bluetooth® headphones or Bluetooth® music receiver.
2. Press the pairing button (check the device manual).
ENGLISH
3
3. After being connected for the rst time, the two devices will recognise each
other next time.
Connect the second set of headphones or music receiver:
1. Take the second set of Bluetooth® headphones or Bluetooth® music
receiver.
2. Press the pairing button (check the device manual).
3. Press the pairing button on the BTTR100BK once for approx. 1~2seconds.
The LED light starts blinking while the transmitter searches for the second
set of headphones or music receiver. The device that was connected rst, is
muted.
4. If the devices are connected, the LED light is constantly switched on.
Note
The BTTR100BK features the option to connect two Bluetooth® A2DP devices at
the same time. If you would like to connect a second A2DP device, you need to
reset the BTTR100BK to establish a new connection.
Reset
Press the pairing button on the BTTR100BK and release it again. The LED light
on the BTTR100BK starts blinking while the transmitter is searching for A2DP
devices nearby.
LED indication
Indication Meaning Description
Flash every 5seconds Pairing Searching for a device in pairing mode
Constantly switched on Connected BTTR100BK and device are connected
Troubleshooting
If you do not hear any sound coming from your headphones or music receiver,
check the following:
- make sure the BTTR100BK is powered;
- make sure the audio cable is correctly connected to the BTTR100BK;
- make sure that the audio source is working properly;
- make sure the volume of the audio source is set correctly;
- make sure your device is at a maximum distance of 10metres of the audio
transmitter.
Produktspecifikationer
| Varumärke: | Nedis |
| Kategori: | Audiostreamer |
| Modell: | BTTR100BK |
Behöver du hjälp?
Om du behöver hjälp med Nedis BTTR100BK ställ en fråga nedan och andra användare kommer att svara dig
Audiostreamer Nedis Manualer
23 September 2024
25 Augusti 2024
23 Augusti 2024
13 Augusti 2024
10 Augusti 2024
4 Augusti 2024
29 Juli 2024
28 Juli 2024
Audiostreamer Manualer
- Russound
- Pro-Ject
- Vogels
- Marantz
- On-Hold Plus
- Dane Elec
- Konig
- Amazon
- Aluratek
- Bose
- Technics
- Pioneer
- Caliber
- Onkyo
- Control4
Nyaste Audiostreamer Manualer
14 Januari 2025
6 Januari 2025
6 Januari 2025
31 December 2025
12 Oktober 2024
3 Oktober 2024
26 September 2024
26 September 2024
25 September 2024
25 September 2024