Nedis WIFILC11WTE27 Bruksanvisning

Nedis Lättnad WIFILC11WTE27

Läs gratis den bruksanvisning för Nedis WIFILC11WTE27 (8 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 4 recensioner. Har du en fråga om Nedis WIFILC11WTE27 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/8

Full manual Nedis SmartLife ™

Download the app: Nedis SmartLife from Apple App store or Google Play Store.

Create account

Select country code and enter full naonal phone number or email address and then

request vericaon code.

Enter received vericaon code and pick your own password.

Add device

1. Tap “+” on the top right corner. A list of potenal products appears.

2. Select the device type you want to add from the list

3. Acvate the device to be added by plugging it in or connecng the baer y.

4. Make sure the indicaon LED (or the lighng device) ashes quickly (as shown in example in the

applicaon) and tap the buon to conrm.

If the light is not ashing quickly hold the reset buon (or switch the bulb o and on for 3 mes) unl

it ashes.

5. Conrm your phone is connected to the Wi-Fi network to which the device will be added, enter the

Wi-Fi password and conrm.

6. Now the device will be searched, make sure your phone and the device are close to the router to

opmize recepon.

7. Aer the product is found and added, rename it so you can easily recognize it.

If above method fails (this can be due to unstable network or specic network protecon) add the device using

AP mode by following the steps below.

Add device (AP mode)

1. Tap “+” on the top right corner. A list of potenal products appears.

2. Select the device type you want to add from the list

3. Hold the reset buon (or switch the bulb o and on for 3 mes) unl the indicaon LED (or lighng

device) ashes (as shown in example) SLOWLY

If the light is ashing quickly, reset again by holding the reset buon for about 5 seconds or switching

the light o and on 3 mes.

4. Conrm the Wi-Fi network to which the device will be added, enter the Wi-Fi password and conrm.

5. Connect -Fi hotspot (SmartLife_xxxx) your phone to the device’s Wi

6. If asked: conrm to stay connected to Wi-Fi network without internet access

7. Go back to the Nedis SmartLife applicaon to connue installaon.

8. Now the device is sent the instrucons to connect to your exisng Wi-Fi network, make sure your

phone and the device are close to the router to opmize recepon.

9. Aer the product is found and added, rename it so you can easily recognize it.

Produktspecifikationer

Varumärke:	Nedis
Kategori:	Lättnad
Modell:	WIFILC11WTE27
Mobila operativsystem som stöds:	Android, iOS
Diameter:	60 mm
Gränssnitt:	Wi-Fi
Modell:	Smart glödlampa
Ljusflöde:	470 LM
Lampans livslängd:	25000 h
Dimbar:	Ja
Färgåtergivningsindex (CRI):	80
Produktens färg:	Vit
Antal per förpackning:	1 styck
ljus färg:	Varmvitt
Temperatur vid drift:	-20 - 45 ° C
AC-inspänning:	230 V
Lamptyp:	LED
Produktlängd:	110 mm
Växelström Frekvens:	50 hz
På / av-knapp:	Ja
Lampor:	6 W
Fäste/lock:	E27
Lampans form:	A-formad
Energieffektivitetsklass för inkluderad lampa (gammal):	A+
Ekvivalent ström på glödlampa:	40 W
Frekvensomfång (Hue-brygga):	2400 - 2482.5 MHz