Netgear ProSafe GS716T Bruksanvisning
Läs gratis den bruksanvisning för Netgear ProSafe GS716T (2 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 4.5 recensioner. Har du en fråga om Netgear ProSafe GS716T eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Installation Guide
NETGEAR ProSAFE Smart Switch™ GS716Tv3
NETGEAR ProSAFE Smart Switch™ GS724Tv4
NETGEAR ProSAFE Smart Switch™ GS748Tv5
Package Contents
•NETGEAR ProSAFE Smart Switch
•Rubber footpads for tabletop installation
•AC power cord
•Rack-mount kit for rack installation
•Installation guide
•Smart Switch resource CD that includes the Smart Control Center Utility
and hardware installation guide. (A link to the online software administration
manual is on the resource CD.)
Configure the Switch
Install the Smart Control Center Utility and use it to configure the switch.
Install the Smart Control Center Utility on a Computer
1. Insert the resource CD into your CD drive.
2. Run the Setup program to install the Smart Control Center Utility.
The Installation Wizard guides you through the installation.
Connect Your Smart Switch
If you have a DHCP server in you network, see Connect the Switch to Your
Network.
If you are using static IP addresses in you network, first see Configure the
Switch with a Static IP Address Connect the Switch to Your , and then see
Network.
Configure the Switch with a Static IP Address
If you are using a static IP address in you network, configure the switch IP
address before connecting the switch to your network. The default IP address of
the switch is 192.168.0.239.
Note: If you are using a DHCP server in your network, this procedure does not
apply to you; instead, go directly to Connect the Switch to Your Network.
1. Set up the computer with a static IP address in the 192.168.0.x subnet.
2. Connect the computer to the switch.
3. Configure the IP address of the switch to match your network
configuration.
Connect the Switch to Your Network
1. Connect each computer to an RJ-45 network port on the switch front
panel.
Use Category 5 (Cat 5) or better Ethernet cable terminated with an RJ-45
connector to make these connections.
2. Connect the switch to your network.
3. Power on the switch.
4. Verify that the computer with the Smart Control Center Utility is on the same
subnet as the switch.
Configure the Switch with the Smart Control Center
Utility
1. Double-click the Smart Control Center Utility icon on your desktop or
click the icon in the Windows Start menu to run the utility and view this
screen.
2. Click the Discover button.
Produktspecifikationer
| Varumärke: | Netgear |
| Kategori: | Växla |
| Modell: | ProSafe GS716T |
Behöver du hjälp?
Om du behöver hjälp med Netgear ProSafe GS716T ställ en fråga nedan och andra användare kommer att svara dig
Växla Netgear Manualer
4 Januari 2025
15 Oktober 2024
23 September 2024
3 September 2024
1 September 2024
30 Augusti 2024
29 Augusti 2024
26 Augusti 2024
26 Augusti 2024
24 Augusti 2024
Växla Manualer
- Shimano
- Shelly
- Pizzato Elettrica
- Cisco
- INOGENI
- Elation
- DEHN
- STI
- Ecler
- HELGI
- Grasslin
- Plantronics
- Phoenix Contact
- Toolcraft
- GAO
Nyaste Växla Manualer
9 April 2025
9 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
3 April 2025
3 April 2025
2 April 2025