NGM WeMove Quasar Bruksanvisning
NGM
Mobiltelefon
WeMove Quasar
Läs gratis den bruksanvisning för NGM WeMove Quasar (10 sidor) i kategorin Mobiltelefon. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 8.5 recensioner. Har du en fråga om NGM WeMove Quasar eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/10
Set up
Installing the USIM cards
The USIM card stores information as your personal phone
number, PIN code, carrier services numbers, contacts and other
important details. To access the USIM slots, turn off the phone,
take off the back cover by lifting it up from its lower part and
extract the battery. The slots for the USIM cards are placed over
the battery tray. Insert your USIM cards by sliding them in with
their golden contacts facing downwards. USIM1 supports
WCDMA.
Installing the memory card
In order to use all functions of NGM WEMOVE QUASAR, it is
advisable to install a micro-SD card: it must be inserted in the
back side of the phone, after powering it off and removing the
back cover. A dedicated slot fort the memory card is placed
right next to the hind camera; Unlock the micro-SD grid by
pushing it into the “Open” direction. Slide in the memory card
so that the gold contacts are turned downwards. Close the grid
and push it into the “Lock” position.
microSD
USIM2: GSM
USIM1: UMTS or GSM
Inserting the battery
Your device is provided with a lithium-ion battery and is
designed to be used exclusively with original NGM batteries and
chargers. The battery must be inserted into the backside of the
phone (see illustration below) with the battery contacts facing
the contacts in the battery tray. When done, put the hind cover
back into position as shown in the following illustrations.
Charging the battery
Please charge the battery completely before starting to use the
device. Use the provided USB cable, connecting one end to the
provided wall socket adaptor (placed into a socket) and the
other end to the USB connector placed on the left side of the
phone. The phone can also be charged by connecting it to a PC
USB port but in that case it will charge more slowly. While the
battery is charging, an animation on screen will show the
charging progress if the phone is on. Once charge is completed,
the icon will be filled and the phone can be disconnected from
the grid.
Warning: Do not connect the phone to a booting-up or running
down PC to avoid voltage jumps. In order to preserve the correct
functioning of the device and in order not to compromise
warranty, the sole use of original NGM battery chargers and
accessories are recommended. Please charge the battery
indoors, in a dry and favorable environment. It’s normal for the
battery to get slightly warm during the charging process. The
battery will reach the full capacity when cycled several times.
Volume
“ +” and “–“
Camera
Speaker
Flash
Micro USB
Connector
Receiver
Capacitive
touch screen
Front camera
Brightness and proximity sensor
Home
Back
Find
On/Off and
Standby key
Contextual Menu
Call key
Messaging
Microphone
Menu
Produktspecifikationer
| Varumärke: | NGM |
| Kategori: | Mobiltelefon |
| Modell: | WeMove Quasar |
Behöver du hjälp?
Om du behöver hjälp med NGM WeMove Quasar ställ en fråga nedan och andra användare kommer att svara dig
Mobiltelefon NGM Manualer
18 Augusti 2025
18 Augusti 2025
18 Augusti 2025
18 Augusti 2025
17 Augusti 2025
17 Augusti 2025
17 Augusti 2025
14 Augusti 2025
14 Augusti 2025
14 Augusti 2025
Mobiltelefon Manualer
- CAT
- HTC
- GSmart
- Alecto
- Samsung
- Lenovo
- Lava
- Maxwest
- Bush
- Hisense
- Xiaomi
- Siemens
- Bixolon
- M3 Mobile
- Sunstech
Nyaste Mobiltelefon Manualer
22 September 2025
22 September 2025
21 September 2025
18 September 2025
18 September 2025
18 September 2025
18 September 2025
18 September 2025
18 September 2025
17 September 2025