NGM Vanity Smart Bruksanvisning

NGM Mobiltelefon Vanity Smart

Läs gratis den bruksanvisning för NGM Vanity Smart (11 sidor) i kategorin Mobiltelefon. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 12.5 recensioner. Har du en fråga om NGM Vanity Smart eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/11

English

Setting up

Installing the SIM card

The SIM card stores information such as your personal phone

number, PIN code, carrier services numbers, contacts and other

important details. Remove the back cover from the phone first,

sliding a thin object like the side of a credit card or your nail

into the slit on the lower side of the phone to dislodge it from

the chassis.

Both SIM cards must be inserted in the slots placed on the back

side of the phone, with the golden contacts facing downwards.

See the diagram below:

Installing the Memory card

The MicroSD card must be inserted, as for the SIM cards, into

the back side of the phone, after powering it off and removing

the battery. A dedicated slot fort the memory card is placed in

front of the SIM cards. Unlock the memory card slot by pushing

the metal harness toward the “Unlock” position, then open the

harness and let the memory card slide in, with the golden

contacts facing downwards. Then close and lock the harness.

See the diagram below:

Inserting the battery

Your device is provided with a lithium-ion battery and is

designed to be used exclusively with original NGM batteries and

chargers. Battery must be inserted from the backside of the

phone (see the diagram below). Align the battery contacts with

the phone connector inside the dedicated slot, and let it slide

down in position. Once the battery is inserted, close the back

cover by gently pushing it in position through soft pressure all

along the border lines of the cover.

Charging the battery

Please charge the battery completely before starting to use the

device. Use the USB cable provided, connecting one end to the

USB connector placed on the top side of the phone and the

other end to the provided wall socket adaptor. While the

battery is charging, a counter on screen will show the charging

progress. Once charge is completed, the phone can be

disconnected from the grid.

Note: use only the provided USB cable for charging the device.

Please charge the battery indoors, in a dry and favorable

environment.

It’s normal for the battery to get slightly warm during the

charging process. The battery will not reach the full capacity

until cycled several times.

Warning: In order to ensure the correct functioning of the

device and not to void the warranty, please use only original

NGM chargers.

Batteries should not be disposed of as domestic garbage. Please

follow your local disposal rules.

Produktspecifikationer

Varumärke:	NGM
Kategori:	Mobiltelefon
Modell:	Vanity Smart
Typ av operation:	Knoppen
Färg på produkten:	Wit
Husmaterial:	Kunststof
Internationell säkerhetskod (IP):	IP44
Batteri/Batterispänning:	9 V
Frekvens:	868 MHz
Kompatibla produkter:	ELRO; HIS2X, HA6X
Maximalt utomhusbereik:	75 m
Antal rörelsesensorer:	- stuk(s)
Antal dörr-/karmsensorer:	- stuk(s)