Oklahoma Sound 6010 Bruksanvisning
Läs gratis den bruksanvisning för Oklahoma Sound 6010 (4 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 8 recensioner. Har du en fråga om Oklahoma Sound 6010 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
O S CklahOma Ound OrpOratiOn
optional / additional equipment
assembly manual
ARISTOCRAT
Sound Floor Lectern
model #6010
brass reading lamp / #brl
Attach an elegant brushed brass reading lamp to
the reading table of your new Speaker Stand. Not
only will you shed light on the subject, but you will
add pizzaz to your new stand.
rechargeable battery / #ps12V
Connect this 12V 5 amp rechargeable battery
pack with included cable to any of our lecterns
for battery power. 20 hour life. Lecterns recharge
battery overnight.
aristocrat contour
Floor lectern / #600
The perfect lectern for the most demanding,
upscale look in your conference, training
and formal meeting rooms. Contoured
style with radius curves. Available in three
woodgrain thermofused melamine laminate
on MDF. Two built in shelves and our side
mounted slide-out shelf for A/V presentation
equipment. Accented by attractive T-mold
edging. Moves eortlessly on four easy roll
castors, two locking. Ready to assemble.
Dimensions: 23" W x 46½" H x 16" D
Walnut, Lt. Oak, Med. Oak, Mahogany.
aristocrat contour
table top lectern / #60
Same upscale styling as its full oor sister, but
in an easy-go table top version. Move this at-
tractive, aordable lectern from room to room
and keep your notes in order and your audi-
ences wowed. Made of thermofused laminate
in four color selections with T-mold edging.
Protective non marring glides included.
Assembly required.
Dimensions: 25" W x 15" H x 20" D
Walnut, Lt. Oak, Med. Oak, Mahogany
For these products please contact your dealer
or Oklahoma Sound Corp.
oklahoma sound corp.
149 Entin Road, Clifton, NJ 07014
Tel 973-594-9000 • Fax 973-594-9339
www.oklahomasound.com • email: info@oklahomasound.com
#BRL
#PS12V
#600
#60
O S CklahOma Ound OrpOratiOn
ARISTOCRAT SOUND FLOOR LECTERN: Model 6010
2 7
INTRODUCTION
Aristocrat Sound lectern - Model 6010
Perfect for the smallest to largest venues. Executive style podium includes
50 watt multimedia amplier with two built in 8" speakers surrounded by
gold appointments. Includes Microphones, Holders, Digital Timepiece and
rolls on four casters. For audiences up to 2,500 people. Assembly required.
Colors: Walnut, Light Oak, Med. Oak, Mahogany/Black Edging
Dimensions: 25¼" W x 46" H x 20¼" D.
ASSEMBLY TIPS
• Do not use a sharp instrument such as a knife or a screwdriver to open the
packaging, as this may scratch or possibly damage the unit.
• All assembly should be done on a clean protected surface such as carpet
or the like.
• Make sure that you have all the required parts. A list of all the parts
is included.
• Read instructions carefully and follow diagrams to ensure easy and
correct assembly.
CARE OF YOUR CABINET
• All exterior and interior exposed surfaces are melamine covered as well as
edges in matching patterned melamine material. To refresh the appear-
ance, wipe the surface with a cloth soaked lightly in furniture oil. Avoid
speaker grill area Your cabinet will look as good as new.
TECHNICAL SPECIFICATIONS
Manufacturers Warranty
Our lectern undergoes the most rigid and exacting tests for superior quality and performance before
leaving the factory. Our lectern is made in America by American craftsmen. Oklahoma Sound
Corporation warrants this product to be free from defective material and workmanship for two years
from the date of resale by an authorized Oklahoma Sound distributor. Oklahoma Sound will replace
defective parts and repair malfunctioning products under this warranty when the defect occurs under
normal installation and use, provided the unit is returned to our factory via prepaid transporta-
tion after direct authorization and approval by Oklahoma Sound. is warranty provides that
examination of the returned product must disclose in our judgement, a manufacturing defect. is
warranty does not extend to any product which has been subject to misuse, neglect, accident, improper
installation, or where the serial number has been removed or defected and is given in lieu of any other
warranty implied or expressed and will not cover any consequential damages.
Power Output .......50W RMS at 10% THD
Mic ............................Electret Condenser Mic (2)
Aux ............................150 mV>220K
Frequency ..............100HZ-25KHZ
Response ................+ 3dB
Power Supply ....110-120V ohms DC 10.8 12V
Fuse ......................2A normal
Output .................8 ohms
Accessories ........Handheld mic; clip-on mic;
gooseneck; Shockmount
mic holder; digital clock
700 Series Amplier Operating Instructions
Operating Precautions
Before operating the amplier, be sure you fully understand all instructions and
features of the amplier. DO NOT turn amplier on until all input and output
connections have been made. NEVER replace fuses unless power is o.
Microphone Input Connection
The microphone input accepts ¼" phone jack. Do not position microphone next
to or facing speakers. This may cause acoustic feedback.
Auxiliary Input
One auxiliary input is provided for radio tune; tape recorder, CD player or multi-
media equipment. Output level is adjusted by the auxiliary volume control.
Tone/Equalization Controls
The Low and High frequency controls are similar to the bass and treble controls
found on most stereo systems. Optimum tone is achieved by rst setting both
knobs halfway; adjust Low and High frequency controls to suit environment.
Power Supply 12V DC Operation
Connect a 12 volt rechargeable battery 5 amp (not included) to the battery
input connector located on the panel of the amplier (using 6' battery cable).
Be sure that the positive pole of battery is connected to the white wire terminal
(+) and the negative pole to the Brass wire (-). When lectern is plugged into a
standard wall outlet, the battery will automatically recharge. Green indicator
light illuminates during recharge mode.
Precautions
• Set Mic volume control on lowest when turning unit on.
• Ensure correct polarity for D.C. supply connections.
• Reverse connections will blow the fuse and may damage internal circuitry.
• Always replace fuse with specied rating.
Removal and Installation of Amplier
If your amplier has to be removed for servicing — follow these simple steps:
1) Disconnect A/C wall plug.
2) Remove 4 side screws two on each side panel under amp top.
3) Disconnect speaker wire at rear of amplier.
4) Pack it into a strong box with ample cushioning and return to factory
5) To install new amplier reverse the above procedure.
O S CklahOma Ound OrpOratiOn
ARISTOCRAT SOUND FLOOR LECTERN: Model 6010
6 3
4) Now apply Panel C to the semi assembled unit. Be sure to align the cam
bolts to the holes on both Panel B and Panel E. Be sure that Panel F is se-
curely in groove. Tighten cams. (Diagram C)
5) Screw the corner braces on the bottom Panel F into Panels A, B and C.
6) Connect the plug coming out of the speakers on Panel B to the plug coming
out of the back of the amp. Fit the amp between the two sides and bring
the amp up until it reaches the
cleats (wood stub) then from the
bottom of the amp screw in four
screws. (Diagram D)
7) Once again go over all the cams
and check to make sure the lec-
tern is sturdy.
8) Screw on gooseneck mic holder
and install microphone for
sound use.
Congratulations! You have success-
fully assembled your lectern, which
if
cared for correctly should give you
long and satisfactory usage.
Diagram "C"
Diagram "D"
Left Side Panel Right Side Panel
Front Panel
ASSEMBLY PARTS
Top
(Reading Surface)
Shelf
Bottom
Tools Required
#2 Phillips Head
Screwdriver
Hammer
Cam Lock Assembly
(1) Gooseneck
............................................
(1) Hand-held
Condenser Mic
............................................
(1) Tie-Clip
Mic
..........................
(2) Locking Casters
........................................
(14) Cams
..........................
(14) Cam Bolts
..........................
(36) #8
½" Phillips
Screw
..........................
(2) Non
Locking
Casters
.............................
(4) Corner Braces
.....................................
(1) Amplier
Series 700
................................................................
A
B
C
E
D
F
Produktspecifikationer
| Varumärke: | Oklahoma Sound |
| Kategori: | ej kategoriserat |
| Modell: | 6010 |
Behöver du hjälp?
Om du behöver hjälp med Oklahoma Sound 6010 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Oklahoma Sound Manualer
24 Augusti 2025
24 Augusti 2025
23 Augusti 2025
23 Augusti 2025
23 Augusti 2025
ej kategoriserat Manualer
- Sommer
- Legrand
- Solo
- Proscenic
- Skil
- WyreStorm
- Ghibli & Wirbel
- DAP Audio
- TSC
- Hom-io
- Testboy
- Avid
- Slate Pro Audio
- Bose
- Lanaform
Nyaste ej kategoriserat Manualer
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025